Meet Your Seller

XinjintongLimited

See Seller Store

Main image of 10-Port 10/100M Smart PoE Switch, Support Watchdog Function Wireless APs - IEEE802.3af/at, Ethernet Network Switch for IP Cameras,VoIP Phones, Wide Temperature Range

Shop All VisiPower Products | Visit XinjintongLimited Store

10-Port 10/100M Smart PoE Switch, Support Watchdog Function Wireless APs - IEEE802.3af/at, Ethernet Network Switch for IP Cameras,VoIP Phones, Wide Temperature Range

Be the first to review this product...

10Port POE Switch & Watchdog FunctionThe smart PoE switch has 8*10/100Base-TX RJ45 ports and 2*10/100Base-TX RJ45 ports. Port 1-8 can support IEEE 802.3af/at PoE standard and single-port PoE power reaches 30W. It can support the watchdog function. When the port communication failure corresponds to the port PoE will automatically restart,self-recover network communication,reducing manual intervention and maintenance. As a PoEpower supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable.
Smart PoE Power Supply & Flexible NetworkingThe smart PoE switch 10/100M access, uplink RJ45 port. Support non-blocking wire-speed forwarding. Support full-duplex based on IEEE 802.3x and half-duplex based on Backpressure. 10*10/100Base-TX RJ45 ports allow users to flexibly network to meet the networking requirements of various scenarios. 8*10/100Base-TX PoE ports can support the watchdog function, r

Overview

Specs

Reviews

Any questions? Ask Celeste^SM will help you find out quickly.

Try me now

Model:ONV-H1108PLD
Interface Characteristics
Fixed Port:
8*10/100Base-TX PoE ports (Data/Power)
2*10/100Base-TX uplink RJ45 ports (Data)
Ethernet Port:
Port 1-6/ 1-10 can support 10/100Base-TX auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
Twisted Pair Transmission:
10BASE-T: Cat3,4,5 UTP (250 meters)
100BASE-TX: Cat5 or later UTP (100 meters)
Function Switch:
E: long-distance transmission and VLAN isolation (Default off)
D: PoE watchdog mode: When the network fails, PoE watchdog will restart the power supply of the device and automatically repair the network communication. (Default off)
Note: The function switch can control different functions, which can be enabled separately and simultaneously.
Chip Parameter
Network Protocol: IEEE 802.3 10BASE-T, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3x
Forwarding Mode: Store and Forward(Full Wire Speed)
Switching Capacity: 2Gbps (non-blocking)
Forwarding Rate @64byte: 1.488Mpps
MAC: 2K
Buffer Memory: 1.25M
Jumbo Frame: 1536byte
LED Indicator: Power: PWR (Green), Network: Link (Yellow), PoE: PoE (Green), Function switch: E/D (Green)
PoE & Power Supply
PoE Port: Port 1-8
Power Supply Pin: 1/2(+) 3/6(-)
Max Power Per Port: 30W, IEEE 802.3 af/at
Total PWR / Input Voltage: 120W/ (AC100-240V)
Power Consumption: Standby<5W, Full load<120W
Power Supply: Built-in power supply, AC100-240V 50-60Hz, 2.2A

Additional Information
First Listed on Newegg	October 23, 2026

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
CONTACT

Return Policies

Return for refund within: 30 days
Return for replacement within: 30 days
This item is covered by XinjintongLimited Return Policy

Manufacturer Contact Info

For a directory of all our manufacturers, please click below.
Manufacturers Directory

Item#: 9SIC6W6M9A3809