VONETS Mini Wireless Bridge Ethernet Adapter Convert RJ45 Port to Wireless WiFi Repeater WiFi Hotspot Signal Extender Range Cover VAP11G-300(Two Items)

Gigabit, Dual-band 2.4GHz/5GHz,10/100/1000Mbps, WiFi Router/Bridge/Repeater, can achieve WiFi to Ethernet or Ethernet to WiFi convert.
Previous page
Next page VONETS VAP11G-300 is a 2.4GHz WiFi Bridge/Wireless Signal Repeater/Hotspot signal extender, can achieve WiFi to Wired or Wired to WiFiWiFi to Ethernet or Ethernet to WiFi convert);
1. WiFi smart Bridge function, can achieve WiFi to Wired or Wired to WiFi function, smart exchange;
2. WiFi smart Repeater mode, WiFi Signal Repeater, can extend the distance of WiFi transfer; it supports WiFi hotspots scan automatically and WiFi hotspot memory function (up to 100);
3. Support turn off the wifi hotspot function;
Note: This device can't be plugged into a USB port and DC power source at the same time( two types of power supply can't be used at the same time) And please do not plug the USB cable of the product into the PC/Laptop USB port to power, need to use a typical/independent 5V/2A power supply to power.
VAP11G-300*2
User manual*1
Retail box*1
VONETS VAP11G-300 has a wide range of applications. It can be used for wired or wireless devices that need to be connected to the Internet.
Industrial 2.4GHz WiFi Bridge/Wireless Repeater; can achieve WiFi to Wired or Wired to WiFi function.
Wireless bandwidth : 2.4G 300Mbps (theoretical value).
WiFi transmission protocol: 802.11B/G/N;
WiFi hotspot memory up to 100 hotspots;
Support for connecting more than 20 WiFi terminals at the same time;
Supports IP layer transparent transmission and MAC layer transparent transmission.

Support wide voltage DC5V-15V (Typical 5V/2A, ripple less than 100mV) ;
Interface:1 DC2.0 power hole; 1 dedicated two-in-one power supply cable, with a set of power supply and a set of 10/100M adaptive Ethernet cable;
LED Status instruction:
WiFi state/Hotspot connection state (blue light);
Ethernet port state (light green for success);
Reset Button: Long press 5 seconds then release (During operation, the product can not be powered down, otherwise it may cause damage to the product.)

can convert WiFi to RJ45(Ethernet) network or RJ45 to WiFi. Use the VAP11G-300 network cable to plug it into the computer's network port and then connect the computer to the Internet. The bridge function can realize the connection of wired devices with WiFi, which largely solves the problems of difficult wiring of wired devices.
Working in the repeater mode, VAP11G-300 can be doubled to extend the original WiFi signal coverage, while it can ensure the security of the wireless signal, its working principle is: at the edges of the original WiFi hot spot signal coverage, the VAP11G-300 that in "repeater mode " is able to receive weak WiFi signal, and then zoom in to the normal, safe strength, and after optimization, error correction processing, to achieve signal coverage distance doubled extension under safe.
AP mode plug and play, simply plug the VAP11G-300 network cable into the broadband network port to connect to the Internet. Other wireless devices can directly connect to the VAP11G-300 to easily access the Internet.
Good Partner for Industrial, Factory, Company, Network Printer, Monitor, DVR, IP camera, Medical devices, IoT devices, Video transmission, POS Cash Register, PS3, Robot, Doll Machine, Electronic Scales, and more network applications.
Tips:
After configuration, if this device doesn't work with your devices or your application is AC managed AP, GoPro camera, Cisco AP, Hikvision surveillance system, please change the setting of "Transmission mode" to "MAC layer transparent";
If you want to use Huawei or iPhone as the source hotspot for WiFi bridge, please select "SSID and password match" in the "Advanced Setting" under the upper-level hotspot password during configuration.
If the device disconnects frequently or other problems during use, you can upgrade the software online and may be able to solv