8 Port Industrial PoE Switch with 2 BT 90W PoE++ Ports, 2 Gigabit SFP Uplinks, 1 Gigabit Uplinks, 240W Budget DIN-Rail Switch for PTZ Camera/Lighting/Monitor

8-Port Industrial PoE Switch with 2×90W PoE++ & 6×30W PoE+Equipped with 2×10/100Mbps IEEE 802.3af/at/bt PoE++ ports (up to 90W per port for PTZ cameras, PoE lighting, industrial monitors) and 6×10/100Mbps IEEE 802.3af/at PoE+ ports (up to 30W per port). Total PoE budget 240W, with port 18 also usable as uplink. One switch covers mixed high-power and standard PoE devices on the factory floor.
Gigabit Electrical Uplink + Dual SFP Fiber SlotsFeatures 1×10/100/1000Mbps RJ45 uplink and 2×1000Base-X SFP slots for long-haul single-mode/multi-mode fiber backhaul. Ideal for connecting remote IP cameras, wireless APs, and PLC cabinets to a core network in smart city, rail, or energy SCADA deployments.
4 DIP Switches: AI PoE Watchdog, 250m Long Reach, Port Isolation, Storm ControlHardware DIP-controlled modes let you enable AI PoE auto-recovery (reboots frozen PDs), extend transmission to 250m on ports 18, isolate downstream ports to stop lateral broadcast/multicast spread, and suppress storm trafficno PC or CLI needed, field-tunable in seconds.
Dual DC Redundant Power & 802.3bt 4-Pair Pinout (Mode A/B Compatible)Supports 2-channel DC 4856V redundant terminal-block input with reverse-polarity protection. PoE++ ports use 4-pair 8-pin power (1/2/4/5 +, 3/6/7/8 ) per IEEE 802.3bt and remain backward compatible with legacy PoE Mode A (1/2+, 3/6) and Mode B (4/5+, 7/8) PDs, eliminating injector headaches.
IP40 Rugged Fanless Housing, -40°C to 75°C (-40°F to 167°F), Vibration/Shock ResistantBuilt in an IP40 pure aluminum housing with iron top panel for DIN-rail or wall mount, fanless passive cooling, IEC-level vibration/shock tolerance. Operates from -40°C to 75°C (-40°F to 167°F) in outdoor cabinets, substations, tunnels, and mobile vehicles where commercial switches fail.