Your Browsing History
Meet Your Seller
LoRa Node for Meshtastic & MeshCore - Long-Range Off-Grid Mesh Device
- nRF52840/SX1262 Meshtastic GPS node. Long range, ultra battery. Out-of-the-box ready for hiking & emergency survival.
- STAY CONNECTED WITHOUT CELL SERVICE: Build your own off-grid communication network with Meshtastic LoRa technology. Send text messages, share locations, and relay data even when cellular networks are unavailable. Ideal for hiking, camping, emergency preparedness, and outdoor adventures.
- LONG RANGE MESH COMMUNICATION WITH GPS: Equipped with Semtech SX1262 LoRa radio and built-in GNSS/GPS module for reliable location sharing and telemetry. The high-gain 915MHz antenna supports extended line-of-sight communication up to 50km in open environments.
- LONG-LASTING BATTERY FOR OUTDOOR USE: Built-in 1500mAh rechargeable Li-Po battery supports up to 40-48 hours of continuous GPS tracking. Disable GPS and use it as a low-power relay node with standby operation up to 8 days.
- READY FOR MESHTASTIC, COMPATIBLE WITH MESHCORE: Pre-flashed with Meshtastic firmware for quick setup wit
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Build Your Own Off-Grid Communication Network
When cellular service is unavailable, stay connected with this Meshtastic LoRa node. Designed for hikers, campers, outdoor explorers, emergency preparedness users, and wireless communication enthusiasts, this device enables decentralized text messaging, location sharing, and data relay without relying on cellular networks or monthly fees.
Long Range Communication Beyond Cell Coverage
Powered by the Semtech SX1262 LoRa chip and Nordic nRF52840 Bluetooth 5.0 MCU, this compact device creates a reliable mesh communication network. The built-in GNSS/GPS module provides real-time location tracking, while the high-gain 915MHz antenna supports extended line-of-sight communication in open environments.
Ready to Use with Meshtastic Firmware
Pre-flashed with Meshtastic firmware for quick setup. No complicated programming or firmware flashing required. Simply power on, connect through Bluetooth, and start building your local mesh network.
Designed for Outdoor Adventures
Whether hiking in remote areas, camping off-grid, preparing for emergencies, or exploring wireless communication projects, this portable LoRa node provides a reliable way to exchange messages and share locations when traditional networks fail.
Key Features:
- Meshtastic firmware pre-installed
- Long-range LoRa mesh communication
- Built-in GPS/GNSS location tracking
- nRF52840 Bluetooth 5.0 MCU
- Semtech SX1262 LoRa radio chip
- 1.14-inch color TFT display with physical buttons
- 1500mAh rechargeable Li-Po battery
- Durable ASA housing, -20°C to +70°C operating temperature
- USB-C charging support
- No cellular network or subscription required
Technical Specifications:
MCU: Nordic nRF52840 Bluetooth 5.0 BLE
LoRa Chip: Semtech SX1262
Display: 1.14-inch Color TFT Screen
Battery: 1500mAh 3.7V Li-Po Battery
Charging: USB-C 5V Input
Frequency: 915MHz
Important Notes:
- Communication range depends on terrain, antenna height, and environmental conditions.
- This device is not waterproof.
- The outer shell uses custom 3D printing; minor surface layer lines are normal and do not affect performance.
- Advanced Meshtastic configuration may require learning from official open-source resources.
When cellular service is unavailable, stay connected with this Meshtastic LoRa node. Designed for hikers, campers, outdoor explorers, emergency preparedness users, and wireless communication enthusiasts, this device enables decentralized text messaging, location sharing, and data relay without relying on cellular networks or monthly fees.
Long Range Communication Beyond Cell Coverage
Powered by the Semtech SX1262 LoRa chip and Nordic nRF52840 Bluetooth 5.0 MCU, this compact device creates a reliable mesh communication network. The built-in GNSS/GPS module provides real-time location tracking, while the high-gain 915MHz antenna supports extended line-of-sight communication in open environments.
Ready to Use with Meshtastic Firmware
Pre-flashed with Meshtastic firmware for quick setup. No complicated programming or firmware flashing required. Simply power on, connect through Bluetooth, and start building your local mesh network.
Designed for Outdoor Adventures
Whether hiking in remote areas, camping off-grid, preparing for emergencies, or exploring wireless communication projects, this portable LoRa node provides a reliable way to exchange messages and share locations when traditional networks fail.
Key Features:
- Meshtastic firmware pre-installed
- Long-range LoRa mesh communication
- Built-in GPS/GNSS location tracking
- nRF52840 Bluetooth 5.0 MCU
- Semtech SX1262 LoRa radio chip
- 1.14-inch color TFT display with physical buttons
- 1500mAh rechargeable Li-Po battery
- Durable ASA housing, -20°C to +70°C operating temperature
- USB-C charging support
- No cellular network or subscription required
Technical Specifications:
MCU: Nordic nRF52840 Bluetooth 5.0 BLE
LoRa Chip: Semtech SX1262
Display: 1.14-inch Color TFT Screen
Battery: 1500mAh 3.7V Li-Po Battery
Charging: USB-C 5V Input
Frequency: 915MHz
Important Notes:
- Communication range depends on terrain, antenna height, and environmental conditions.
- This device is not waterproof.
- The outer shell uses custom 3D printing; minor surface layer lines are normal and do not affect performance.
- Advanced Meshtastic configuration may require learning from official open-source resources.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by PartsPro Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















