Your Browsing History
Meet Your Seller
Cudy Outdoor AC1200 Gigabit Wireless Access Point, Outdoor WiFi Extender, IP65 Water Proof, Gigabit RJ45, Beamforming, MU-MIMO, PoE Adapter Included, AP1300-Outdoor
- Outdoor AC1200 Gigabit Dual Band Access Point with MU-MIMO. Designed with the latest 802.11ac Wave 2 technology, Cudy AP1300 can reliably delivers dual band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz to multiple devices simultaneously. Designed with one gigabit ethernet port, AP1300-Outdoor can delivers up to 1000Mbps ethernet speed to wired devices.
- 5-IN-1 Multifunctional Wireless Access Point. AP1300 outdoor is not only an outdoor wireless access point, it can also work as an outdoor WiFi Extender, Gigabit Outdoor WiFi Router, Gigabit Outdoor WISP Router or Gigabit Mesh Router. You can configure the operating mode to meet your requirement.
- RP-SMA interface and detachable WiFi antennas. 2 external 5dBi WiFi antennas enhance the sensitivity of the router and improve the signal quality of WiFi. At the same time, the WiFi antenna is a detachable design. If you want to use other high gain outdoor antennas, the RP-SMA connector also provides the possibility of an exter
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.
Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.
The AP is protected by an IP65 standard case, shielding it from rain and dust when installed vertically. It also features 4 kV Lightning/Surge and 8 kV ESD protection for higher reliability in thunderstorms. Its working temperatures span from -40 °F to 149 °F (-40 to 65 ).
Enhance the Wi-Fi experience for your visitors by implementing a unified Wi-Fi name across your entire premises. With mesh technology, enjoy uninterrupted roaming as clients seamlessly connect to the strongest available Wi-Fi node without manual switching.
Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)
Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.
Supports two powering methods
802.3at/af PoE (Max power: 11 W, Idle: 7.5 W)
24-57 V Passive PoE (Adapter included, not waterproof)
If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.
A mounting kit is included in the box, supporting
Wall-Mounting
Pole-Mounting
Speedy Dual-Band AC1200 Wi-Fi Boosted Wi-Fi Coverage with Beamforming Works in Rain, Thunder, Dust, Heat, Cold Seamless Roaming for Smooth Wi-Fi Experience Plug-and-Play Mesh Installation Simply Plug and Unplug for Mesh Setup Leave the Rest to Adaptive Routing Guide to Wiring and Physical Installation Gigabit Port with Two PoE Options Mounting Kit Included
Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.
The AP is protected by an IP65 standard case, shielding it from rain and dust when installed vertically. It also features 4 kV Lightning/Surge and 8 kV ESD protection for higher reliability in thunderstorms. Its working temperatures span from -40 °F to 149 °F (-40 to 65 ).
Enhance the Wi-Fi experience for your visitors by implementing a unified Wi-Fi name across your entire premises. With mesh technology, enjoy uninterrupted roaming as clients seamlessly connect to the strongest available Wi-Fi node without manual switching.
Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)
Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.
Supports two powering methods
802.3at/af PoE (Max power: 11 W, Idle: 7.5 W)
24-57 V Passive PoE (Adapter included, not waterproof)
If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.
A mounting kit is included in the box, supporting
Wall-Mounting
Pole-Mounting
Speedy Dual-Band AC1200 Wi-Fi Boosted Wi-Fi Coverage with Beamforming Works in Rain, Thunder, Dust, Heat, Cold Seamless Roaming for Smooth Wi-Fi Experience Plug-and-Play Mesh Installation Simply Plug and Unplug for Mesh Setup Leave the Rest to Adaptive Routing Guide to Wiring and Physical Installation Gigabit Port with Two PoE Options Mounting Kit Included
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- Read full details
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by LEMITE Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...