Banana Pi BPI-R3 Wi-Fi 6 OpenSource Wireless Dual-Band OpenWRT Router Board with MediaTek MT7986(Filogic 830),Support 5X GbE and 2X 2.5GbE SFP (Bundle3-BPI R3+Antennas)

Having been doing R&D in embedded systems and electronic hardware for more than 10 years. WayPonDEV Team is an experienced robotics and open-source IOT hardware provider and designer, catering to hardware engineers, DIY enthusiasts and interactive designers.
CPUMediaTek MT7986 (Filogic 830) Quad core ARM Cortex A53+MT7531 chip designSDRAM2GB LPDDR3Onboard Storage8GB eMMC and MicroSD (TF) SlotGPIO26 Pin GPIO,some of which can be used for specific functions including UART, I2C, SPI, PWM, I2SNetwork Port5x 10/100/1000Mbps Gigabit portsSFP Optical Port2 SFP 2.5GbEWifiWifi 6 4x4 2.4G Wifi (MT7975N) + 4x4 5G Wifi (MT7975P)PCIeMini PCIe via USBM.2M.2 KEY-E PCIe inerfaceUSB1 USB 3.0 host ,2 USB interface with slot.DC Power Supply12V/2A with DC inLedsPower status Led and RJ45 LedSizes100.5x148mm same as Banana Pi BPI-R64 and Banana Pi BPI-R2Weights200g Banana Pie BPI-R3 open source router development board using MediaTek MT7986 (Filogic 830) quad-core ARMA53 + MT7531A chip design, on-board 2G DDR memory and 8G eMMC storage, this is a very high-performance open source router development board , support for WIFI 6, 2.4G Wifi wireless using the MT7975N chip, 5G Wifi using the MT7975P chip, support for 2 SFP optical communication interface, 5 Gigabit Ethernet port.
MediaTek Filogic 830 Filogic 830 integrates four Arm Cortex-A53 cores at up to 2GHz, with processing power of up to 18,000 DMIPs, dual 4x4 Wi-Fi 6 connectivity of up to 6Gbps, and two 2.5G Ethernet interfaces and Serial Peripheral Interface (SPI).Filogic The 830 has a built-in hardware acceleration engine for fast and reliable Wi-Fi offloading and wireless connectivity.
In addition, the chip supports MediaTek's FastPath technology for low-latency applications such as gaming, AR/VR, etc. The Wi-Fi 6 offers a number of advantages over its predecessors, including lower latency, greater bandwidth capacity, and faster transfer rates. Wi-Fi devices supporting the 6GHz band utilize a 160MHz wide channel and the uncongested bandwidth of 6GHz to provide multi-gigabit transmission and low-latency Wi-Fi connectivity for reliable wireless connectivity for applications such as streaming media, gaming, AR/VR, and more.

Application Direction :
Internet service router
Wireless Router
Wireless Repeater
Home security Gateyway
Home Automation
Nas equipment
Network and communication applications

Notice:
The SFP serdes of R3 are fixed 2.5Gbase-X, so only SFP that support this protocol can be used.
And there is no debugging insertion detection function, so there will be no prompt when inserting any SFP module.

-----The SFPs we have tested that work are as follows:
2.5G Copper: SFP-2.5G-T-R-RM
2.5G Optical Fiber: SFP-2.5G-BX0-U/SFP-2.5G-BX0-D
TP-LINK 2.5G Copper: TL-SM410U
TP-LINK 2.5G Optical Fiber: TL-SM411LSA-500m/TL-SM411LSA-500m

Who we are BPI-R3 Wi-Fi 6 OpenWRT Router Board Hardware Spec Banana Pi BPI-R3 Wi-Fi 6 Open Source Wireless Dual-Band OpenWRT Router Board BPI-R3 Router Board Hardware interface 2x 2.5G SFP Module Slot