Displayport KVM Switch 2 Monitors 2 Computers with Audio Jack - 8k@60HZ 4K@144Hz Dual Monitor Kvm Switch with 3 USB 3.0 Port Sharing Keyboard Mouse, Included Wired Remote 2 Cables Displayport Switch

2 computers share DP dual monitors.Up to 8K60Hz/4K120Hz.2 display modes - mirror and extend mode.Add 3 USB 3.0 ports.With audio and microphone output.Plug and play function, no driver required.
1. Connect the DC/12V adapter to the KVM.
2. Connect the DP cable to the KVM and the monitor (output).
3. Connect the DP cable and USB cable to the KVM and the computer/laptop (input) (2 USB cables are included in the package, no DP cable is provided).
DP IN1 A + DP IN1 B + USB IN1=PC1DP IN2 A + DP IN2 B + USB IN2=PC2
4. Plug the mouse and keyboard into the KVM switch
Notes:
1. Most of the reasons why only one video output works are due to improper connection. Please make sure that each computer has 2 DP cables connected to the KVM.
2. Please check whether DP IN and USB IN correspond, DP OUT A, DP OUT B correspond, mixed insertion is not supported.
3. For the best audio-visual performance, a short DisplayPort 1.4 cable works better.
In Duplicate mode, both monitors display the same content simultaneously, making it easy to share information. In Extend mode, each monitor operates independently, allowing seamless transitions between screens and providing a larger workspace for multitasking.(Note: Your computer's graphics card must support Duplicate and Extend modes for optimal functionality)
Two Switching Methods
Backward compatible with 4K@240Hz, 4K@120Hz, 4K@60Hz, 4K@30Hz and below. (Note: If you want to achieve the maximum resolution, your computer and monitor need to support 8K resolution, and you need to use an 8K DP1.4 cable to connect the devices)
8K HDMI Dual Monitor Displayport KVM Switch for 2PC Installation steps: Duplicate and Extend Mode: UHD 8K@60Hz