5952 VHB Tape: 2.5cm. x 15 ft. (Black)

The 5952 Heavy Duty Mounting VHB Tape is a black, double-coated VHB adhesive featuring an acrylic foam core. A modified acrylic adhesive is applied to both sides of a highly conformable foam, which provides strong adhesion to a wide variety of substrates and surfaces, including most powder coated paints. It is supplied on a red film release liner. This double-sided tape (heavy-duty 45-mil) offers the simplicity and convenience of a tape fastener and is suitable for numerous indoor and outdoor bonding applications. It can, in many instances, serve as a replacement for liquid adhesives, rivets, spot welds, and other permanent fasteners.

Note: It is advised to use 4 square inches of 5952 VHB tape for each 1 pound of load. Rough surfaces might need extra tape.
Carrier/Backing: closed-cell acrylic foam.
Adhesive: modified acrylic.
Release Liner: red PE film.
Thickness: 50 mils (carrier, adhesive, liner); 45 mils (carrier, adhesive); 5 mils (liner).
Adhesion: 320 ounces per inch (to stainless steel test panel).
Tensile Strength: 90 pounds per inch (longitudinal).
Service/Operating Temperature: up to 250°F.
Application Temperature: 50°F to 100°F.
Core: 3-inch diameter. This double-sided tape is designed for automotive and heavy-duty applications and can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners