WERLEO 2-in-1 NGFF or mSATA SSD to SATA 3.0 Adapter Converter Card Support Mini SATA Hard Drive or M.2 B Key HDD with with 2.5 inch SATA Cable

Highlights: Support half size 26.8 mm and full size 50.95 mms mSATA SSD Support NGFF M. 2 SATA SSD with Key B including Key B+M Support Hi-Speed SATA3/ 6Gbps mass storage interface. M. 2 (NGFF) & mSATA to SATA III Adapter board. Green LED indicates power status Red LED indicates active status Thermal shutdown protection
Features: - The all new 2-1 Thunder Board is the latest All in one M. 2 & mSATA SSD to SATA Adapter in the market. - Use it to easily connect any of the 6 different size M. 2 or mSATA SSDs to any SATA port. - Once connected the M. 2 SSD shows on your desktop or laptop computer as a new partition. - It can be used as a bootable disk and requires no extra driver. - It is suitable for both PC and Mac systems. - With read speed up to 520MB/s.
Notice: If both M. 2 & mSATA SSD inserted at the same time the M. 2 SSD will take priority. The mSATA SSD will be disabled until the M. 2 SSD is removed.
Specifications - Dimension: 98 x 65.5 mm. - M. 2 (NGFF) & mSATA to SATA III Adapter board. - Green LED indicates power status; Red LED indicates active status. - Support SATA Reversion 3.2. - PCI Express M. 2 Spec. Revision 0.7, Version 1.0. - PCI Express Mini Card Electromechanical Spec. 1.2. - Thermal shutdown protection. - Short circuit protection, In-rush current suppression. - PWM synchronous buck converter Power IC. Support the following form factor M.
2 (NGFF) SSD: Type
2230-D2-B-M: 30mm (L) x 22mm (W)
Type 2242-D2-B-M: 42mm (L) x 22mm (W)
Type 2260-D2-B-M: 60mm (L) x 22mm (W)
Type 2280-D2-B-M: 80mm (L) x 22mm (W) Support the following form factor
mSATA SSD: Half
size mSATA: 26.8 mm (L) x 30mm (W)
Full size mSATA: 50.95 mm (L) x 30mm (W)