

SATA Power and Data 2-In-1 Cable
This SATA power and data cable 2-in-1 cable uses 6Gbps transmission speed, much faster than ATA and PATA, also known as: Serial ATA, SATA or S-ATA. It is a computer bus interface used to connect the host bus adapter with mass storage devices such as optical drives and hard disks. This interface is usually used to connect a hard drive to a host system, such as a computer motherboard.

SATA III Data with IDE Cable
SATA is a computer bus. It uses a serial method to transmit data, uses an embedded clock method, and has stronger error correction capabilities. It checks the transmission instructions (not just data). If errors are found, they will be corrected automatically. This greatly improves the reliability of data transmission. The signal part of the serial SATA interface is composed of 7 cables, of which 3 ground wires can weaken and eliminate the interference between serial cables, and the other 4 are two-by-two differential signal wires, which respectively play the role of sending and receiving.
There are 15 cables in the SATA 15 pin power supply part, which provide 3.3V respectively. The cable pin assignments are shown in Fig. 5V, 12V power supply, and the traditional LP4 power connection provides power to the SATA hard drive.

Features of SATA Cable
1. Its unique embedded device can install SATA devices into small devices.
2. Equipped with miniature connector specifications, making SATA devices more compact.
3. The SATA cable supports hot swap function.
4. Compared with the parallel transmission method, the SATA transmission method has greatly improved the speed.

Specification:
The SATA III data power cable is made of high-quality oxygen-free pure copper core and 26AWG wire. The length of the power cord and the charging cord are both 50 cm and 19.7 inches, which is enough for extension. Backward compatible with SATA I and SATA II.
The outside of the SATA power cord is insulated and braided, and the charging process does not generate heat. The SATA data cable adopts a safe and soft PVC sheath, which is flat and soft and can be installed effectively and reasonably in a compact computer case.
Gold-plated pins and stainless steel locks lock the latches at both ends of the cable to ensure a secure connection, thereby realizing fast and reliable file transfer.

Widely Compatible
COMPATIBLE with popular SATA equipped devices / Internal Hard Drive.
What will you get?
SATA Data Power 2-in-1 Cable *2



SATA Power and Data 2-In-1 Cable
This SATA power and data cable 2-in-1 cable uses 6Gbps transmission speed, much faster than ATA and PATA, also known as: Serial ATA, SATA or S-ATA. It is a computer bus interface used to connect the host bus adapter with mass storage devices such as optical drives and hard disks. This interface is usually used to connect a hard drive to a host system, such as a computer motherboard.

SATA III Data with IDE Cable
SATA is a computer bus. It uses a serial method to transmit data, uses an embedded clock method, and has stronger error correction capabilities. It checks the transmission instructions (not just data). If errors are found, they will be corrected automatically. This greatly improves the reliability of data transmission. The signal part of the serial SATA interface is composed of 7 cables, of which 3 ground wires can weaken and eliminate the interference between serial cables, and the other 4 are two-by-two differential signal wires, which respectively play the role of sending and receiving.
There are 15 cables in the SATA 15 pin power supply part, which provide 3.3V respectively. The cable pin assignments are shown in Fig. 5V, 12V power supply, and the traditional LP4 power connection provides power to the SATA hard drive.

Features of SATA Cable
1. Its unique embedded device can install SATA devices into small devices.
2. Equipped with miniature connector specifications, making SATA devices more compact.
3. The SATA cable supports hot swap function.
4. Compared with the parallel transmission method, the SATA transmission method has greatly improved the speed.

Specification:
The SATA III data power cable is made of high-quality oxygen-free pure copper core and 26AWG wire. The length of the power cord and the charging cord are both 50 cm and 19.7 inches, which is enough for extension. Backward compatible with SATA I and SATA II.
The outside of the SATA power cord is insulated and braided, and the charging process does not generate heat. The SATA data cable adopts a safe and soft PVC sheath, which is flat and soft and can be installed effectively and reasonably in a compact computer case.
Gold-plated pins and stainless steel locks lock the latches at both ends of the cable to ensure a secure connection, thereby realizing fast and reliable file transfer.

Widely Compatible
COMPATIBLE with popular SATA equipped devices / Internal Hard Drive.
What will you get?
SATA Data Power 2-in-1 Cable *2





























