Metal Glue Heavy Duty Waterproof, Metal to Metals Adhesive, Liquid Weld, Welding Glue, Cold Weld, Exhaust Repair kit, Weld Stainless Steel, Iron, Aluminum, Fiberglass, Plastic, 1.76 oz

Product Description Automotive Metal Repair glue is a two part, heavy duty, high strength epoxy metal putty that comes in a 1.76 ounce bottle and includes a set of pusher and squeegee mixed at a 1:1 ratio. Metal Epoxy Repair glue is a liquid weld for metal, Metal cold welding glue for metal, and can also be used to fill metal holes with metal filler putty. metal glue for metal glue heavy duty waterproof weld repair . glue for metal to metal can be used as a general purpose metal adhesive to repair boats, automobiles, hardware tools, fuel tanks, pipes, heaters, water tanks, and cracks in hard plastics, car and motorcycle shells
Usage Scenarios Metal Repair glue meets the needs in most daily use scenarios, has a low cost of metal repairs and guaranteed quality. It can be cured at room temperature and has good abrasion resistance, high temperature resistance, low temperature resistance, waterproof, oilproof, corrosion resistance and impact resistance. Whether you're shaping, tapping, filing, sanding or drilling, this metal-to-metal heavy duty glue meets a wide range of repair needs. It is a high-strength, heavy duty metal repair glue epoxy metal binder that replaces traditional complex welding methods and liquid metal is a universal repair adhesive for engineering repairs

Clean and repair metal surfaces

Make sure the surface of the sticking area is dry and free from oil stains, and the surface can be easily polished with a file and sandpaper.

Extruded Metal Repair Glue

Install the push rod and squeeze an equal amount of glue A and B from the two tubes to the stir plate.

Stir Welding glue

Mix the metal glue evenly with stir stick (the mixed glue should be used up within 20 minutes).

Repairing and filling metal objects

Smear the mixed epoxy resin glue evenly on the surface to be bonded, fix it and wait for more than 24h.

CORRECT PRACTICE:40-50°C Warm water preheat3-5 minutes
Soak tube (excluding nozzle) in40-50°C water. Do not use boilingwater/microwave/open flame.Wipe dry before attaching mixingnozzle.

Make sure the surface of the sticking area is dry and free from oil stains, and the surface can be easily polished with a file and sandpaper.

Install the push rod and squeeze an equal amount of glue A and B from the two tubes to the stir plate.

Mix the metal glue evenly with stir stick (the mixed glue should be used up within 20 minutes).

Smear the mixed epoxy resin glue evenly on the surface to be bonded, fix it and wait for more than 24h.

CORRECT PRACTICE:40-50°C Warm water preheat3-5 minutes
Soak tube (excluding nozzle) in40-50°C water. Do not use boilingwater/microwave/open flame.Wipe dry before attaching mixingnozzle.

Meet Your Seller