20Pcs Ceiling Fan Blade Screws, 1/4"-20 x 3/8 Carbon Steel Phillips Pan Motor Replacement Screw for Lighting Ceiling Fan, Copper

What is this?

These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.

What will i get?

Ceiling Fan Blade Screws

Color: Copper;

Material: Carbon Steel;

Total Size: 8.6 x 13mm/0.34 x 0.51 Inch (DxL);

Thread Size: 1/4“-20 UNC;

Thread Length: 10mm/0.39 Inch.

Are there any advantages of the product?

Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.

Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.

Universal Fit: Suitable for Most ceiling fans.

Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.

How to use it?

1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.

2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.

3. Insert & Tighten: Hand-start the screw, then secure diagonally

What should I notice?

1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.

2. Compatibility: For wood/composite blades only; Metal blades require longer screws.

3. Storage: Keep in a sealed bag to prevent washer oxidation.

4. Replacement Tip: Replace all screws per fan.