Question 1

Can you remove the pre installed fans?

Accepted Answer

I DID A OPEN BOX VIDEO ON YOUTUBE the channel is >>>>>>>.........Stevej619....>>>.....that's the channel I did a build with this completed also it has all the newegg links      .......Yes the pre  installed fans can be removed ....and a 240mm water block can be added to the top two fans ....the two front fans can be upgraded to 140mm fans also....I believe a 240mm water block can replace the two front fans as well....this is a very awesome case for the price...the PSU location is close the the motherboard so the CPU 8 pin that's 650mm is long enough to reach.....the rear fan will only house 120mm

Question 2

I see a lot of people talk about the limited cable space, could that ever become a big problem or is it just a nitpick?? 
(could it damage any components)

Accepted Answer

if you have a moderately low wattage PSU, around 600W for example, or you have a modular PSU, then you're ok. It gets a bit tight behind the psu shroud, but the back cable management is fine. I only use a 620w, so I have no problems. if you get to a 700-850w PSS, the PSU might not fit cause it will be too long. if its non modular there would be too much cables. Depends on what you are using

Question 3

Can you turn off the RGB?

Accepted Answer

Well technically it's not RBG it's just blue fans..... But no Blue LED fans are almost always made so they glow wahtever color the LEDs are and only increase/decrease brightness when you change the voltage through the fan controller. If you don't want the LED fans, you can just cut the wires to the LEDs or take them off and replace them (as I did with 3 Arctic F12 and kept the 2 Blue ones and put them on the top mount to look cool.

Question 4

Does the mesh on the front come off to clean off dust? Also is there a removable dust filter on the bottom for the PSU/bottom mounted fans? Lastly do the top fans intake air our push air out of the pc?

Accepted Answer

1. the whole front panel comes off, very easily. This exposes the fans/steel frame underneath.  There is a metal mesh and an additional soft screen mesh. I removed the soft screen mesh ebcause dust got inbetween it and the metal mesh. Also, I wanted to get just a little better airflow for my rig.

2. Yes, there is a removable filter on the bottom for the PSU.

3. The case fans that come with it are aligned so that they push air from inside the case up outside of the case.

Question 5

How much does this weigh?

Accepted Answer

Learn more about the DIYPC D480-W
Model

Brand
    DIYPC

Model
    D480-W

Details

Type
    ATX Mid Tower

Color
    White

Case Material
    SPCC

With Power Supply
    No

Power Supply Mounted
    Bottom

Motherboard Compatibility
    Micro ATX / ATX

Side Panel Window
    Yes

Expansion

External 5.25" Drive Bays
    2

Internal 3.5" Drive Bays
    2

Internal 2.5" Drive Bays
    3 (SSD)

Expansion Slots
    7

Front Panel Ports

Front Ports
    2 x USB 3.0 / 2 x USB 2.0 / Audio In/Out (HD)

Cooling System

120mm Fans
    2 x 120mm Blue LED Fan x Front (Pre-Installed)
    1 x 120mm Blue LED Fan x Rear (Pre-Installed)
    2 x 120mm Black Fan x Top (Pre-Installed)

Dimensions & Weight

Dimensions (H x W x D)
    19.40" x 8.00" x 20.00"

Weight
    15.00 lbs.

Question 6

Does It have HDMI?

Accepted Answer

Its just a computer case doesn't have components inside it. HDMI is going to come from either your motherboard if using onboard graphics or a graphics card. But the product here is just a case meant for you to build your own computer into.

Question 7

Will a Cooler Master Hyper 212 EVO fit in the case ??

Accepted Answer

Yes. I currently have the CM Hyper 212 EVO installed on my cpu with this case.

Question 8

Can I fit a ARCTIC - Liquid Freezer 120 into this case?

Accepted Answer

I have 2x 240mm radiators in the case.  Top has push ex240 (35mm radiator), push/pull xt45 (45mm radiator).  You should definitely be able to fit a push/pull 120 in front, so long as the tubing is long enough.  Should also be able to fit on the rear as exhaust. Don't think it will fit on the top of the case as push/pull, only single layer fan slim radiators fit on top.

Question 9

Will my 11.5 inch gpu fit in this case?

Accepted Answer

It can fit you just have to adjust the mounting screws because they are set for a smaller form factor

Question 10

Does it have a spot to put in a Blu-Ray drive?

Accepted Answer

Yes it has a spot for a blu-ray drive there are 2 drive bays. Also I am very happy with the quality of the case for the price.

Questions & Answers