Soft Non Slip Square Shower Stall Mat with Suction Cups

Most shower mats are designed for bathtubs - long, narrow, and the wrong shape for a stall. This one is square: 21.6 x 21.6 inches (55 x 55 cm), sized to cover the standing area of a standard shower stall. The waffle weave is foamed, not flat. It gives underfoot instead of pressing back, which is a real difference on cold, hard tile. The open grid lets water run straight through to the drain instead of pooling under the mat, so it dries between uses. To install, clean the shower floor first, then rinse the mat and lightly wet the floor. Place the mat with the suction cups facing down and press firmly on each cup until it grips. Push and pull the mat by hand to confirm the cups are secure before stepping on. If it slides, lift the mat, remove excess moisture, and test again. Rinse after each use and hang to dry, or machine wash when it needs a deeper clean. Material is 100 percent PVC. Available in White and Beige. Broder MFG. Inc. is a family owned and operated company.","SQUARE DESIGN BUILT FOR SHOWER STALLS: sized 21.6\" x 21.6\" to cover the area you actually stand on in a standard stall; slightly larger than the common 21\" mat for extra coverage","OPEN WAFFLE GRID DRAINS FREELY: the entire surface is open weave, not a solid mat with small punched holes; water flows through toward the drain instead of pooling and backing up around your feet","SUCTION CUPS SECURE THE MAT: suction cups molded across the underside grip the shower floor and help keep the mat from shifting when you turn, shift your weight, or step off","CUSHIONED AND SOFT ON FEET: the foamed waffle weave gives underfoot instead of pressing back; easier on feet, knees, and lower back than a thin flat mat, and it takes the cold edge off hard tile","MACHINE WASHABLE, TWO COLORS: machine wash and hang to air dry; choose White or Beige, and only install on smooth, clean, non textured and non tiled surfaces, not on grout lines