2-Pack Shower Door Bottom Seal with Drip Rail for 3/8'' Thick Glass 2×39 inch Frameless Shower Glass Door Sweep Seal Strip Covers up to 13mm Gap

PERFECT FIT: 2-PACK Easy-to-cut and install Shower Door Bottom Seal that only fits perfectly with 3/8 inch (10mm) thick glass. The 13mm bottom seal strip can cover a larger gap on the shower screen, which means your bathroom will look clean and dry even after a long shower.
SIZE IS VERY IMPORTANT: The water barrier for shower door has strict requirements on the size of the shower glass door. You must carefully measure and check the size you need before purchasing.
HIGH QUALITY: The glass door seal is made of durable Clear Vinyl material. The transparency is close to glass and will not change color. The sweep at the bottom of the seal is soft and can make the door move more smoothly without noise and stop shower leaks.
WATER LEAKAGE PREVENTION: The Shower Door Bottom Seal is soft and flexible. Even if your gap is lesser than expected (13mm), the shower threshold seal will simply bend and block the water from going out. You can also cut off the soft edge of the bottom seal to fit the gap between the shower screen and the floor. The drip rail directs water back into the shower and prevents water splash.
ADJUSTABLE LENGTH: 39 inch extra long anti-leak shower strip for glass door, for 3/8 inch glass, which can easily be adjusted with the majority of shower doors. The long drip rail can prevent water leakage, and the waterproof seal sweep creates a water barrier.
EASY TO INSTALL: No adhesive needed for installation. Remove the discolored old Bathroom Door Seal Strip from the door, place the new shower weather strip under the glass door, and then first push it up from the side closest to the hinge until the Anti-Leak Shower Strip for Glass Door grips to the glass