Why is the use of handheld bidet sprayer always advocated?
More and more people pay attention to health, and everyone's personal hygiene starts with the bathroom. Start improving your healthy life with a small handheld bidet sprayer.
What can handheld bidet sprayer bring you?
*Ensure good daily hygiene.
*Women are clean during menstruation.
*Hemorrhoids patients are easy to use and reduce infection.
*Friendly to children and old people.
*The best way to wash baby diapers.
TWO ADJUSTABLE WATER PRESSURE CONTROL
We adopt multilayer plating process that make sure the longer life time use! We are confident about our products' quality and assure their durability. Each of our designs is the best result obtained through long-term experiments, to provide the best use experience for each of our customers.
We pay more attention to details. The pressurized bubbler streamdesign will get a perfect balanced clean spray. Also you can control the spray strength by the flexible push switch. The premium stainless steel makes the product more durable and last a longer life time. All you need is included, just follow the steps to install it, it's very easy and quick that in minutes!
STEP 1: TURN OFF THE WATER SUPPLY.
Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank
STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS.
Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
STEP 3: CONNECT THE T-VALVE AND THE HOSES
Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
STEP 4: TURN ON THE WATER SUPPLY & MOUNT THE SPRAYER
Turn the water supply valve back on. If you notice that any connection is loose or leaking, please tighten it again by hand. If you're leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.
PLEASE NOTE:
Turn off the T-Valve handleaffer each use, otherwise yourisk weakening the internalcomponenis or exposing yourhome to water damage.
MORE STYLE CHOICES
PREMIUM ACCESSORIES
Why is the use of handheld bidet sprayer always advocated?
More and more people pay attention to health, and everyone's personal hygiene starts with the bathroom. Start improving your healthy life with a small handheld bidet sprayer.
What can handheld bidet sprayer bring you?
*Ensure good daily hygiene.
*Women are clean during menstruation.
*Hemorrhoids patients are easy to use and reduce infection.
*Friendly to children and old people.
*The best way to wash baby diapers.
TWO ADJUSTABLE WATER PRESSURE CONTROL
We adopt multilayer plating process that make sure the longer life time use! We are confident about our products' quality and assure their durability. Each of our designs is the best result obtained through long-term experiments, to provide the best use experience for each of our customers.
We pay more attention to details. The pressurized bubbler streamdesign will get a perfect balanced clean spray. Also you can control the spray strength by the flexible push switch. The premium stainless steel makes the product more durable and last a longer life time. All you need is included, just follow the steps to install it, it's very easy and quick that in minutes!
STEP 1: TURN OFF THE WATER SUPPLY.
Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank
STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS.
Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
STEP 3: CONNECT THE T-VALVE AND THE HOSES
Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
STEP 4: TURN ON THE WATER SUPPLY & MOUNT THE SPRAYER
Turn the water supply valve back on. If you notice that any connection is loose or leaking, please tighten it again by hand. If you're leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.
PLEASE NOTE:
Turn off the T-Valve handleaffer each use, otherwise yourisk weakening the internalcomponenis or exposing yourhome to water damage.