
Pugrwei Handheld Bidet Sprayer for Toilet

Warm Installation Tips:
After finishing installation, if there is water leakage, please check whether the joint is tightened, if not, please tighten it by hand.
If there is any problem during the installation, please ask us for help at any time, and we will try our best to help you solve your problems.


Two Water Pressure Modes of Sprayers
The water pressure can be changed from jet spray to soft spray, meet your various daily use. The jet spray can be used for cleaning toilet, floors, carpets or baby cloth diapers. The soft spray mode is ideal for women during pregnancy and menstrual cycles to get a gentle and thorough clean up, or baby bath. Such a practical tool beyond imagination!

All Needed Accessories Included
All installation bidet sprayer kits are included, just make sure the water inlet diameter of your toilet tank is 7/8 inch. This bidet sprayer for toilet can be installed in 5 minutes without any professional help.

Full Installation Steps:
*STEP 1: Turn off the water supply valve (on the wall).
*STEP 2: Flush toilet (holding down the handle) to empty the tank completely.
*STEP 3: Disconnect toilet water supply hose from under toilet tank. Put the Flat Rubber Washer inside the nut of the T-valve(7/8" female). Connect T-valve at the toilet tank and reconnect the toilet water supply hose to the bottom of the T-valve(7/8" male). Be sure not to over tighten connections.
*STEP 4: Attach one end of the Bidet Hose(hex nut) to the T-valve(G1/2 male) and the other end to the Sprayer Head .
*STEP 5: Mount Sprayer holder.
*STEP 6: Turn water supply valve back on at the wall, wait 5 minutes and check again. If no leaks, then you are all set!
If there is any problem druring installation, please ask us for help and we will help ypu resolve it.


Pugrwei Handheld Bidet Sprayer for Toilet

Warm Installation Tips:
After finishing installation, if there is water leakage, please check whether the joint is tightened, if not, please tighten it by hand.
If there is any problem during the installation, please ask us for help at any time, and we will try our best to help you solve your problems.


Two Water Pressure Modes of Sprayers
The water pressure can be changed from jet spray to soft spray, meet your various daily use. The jet spray can be used for cleaning toilet, floors, carpets or baby cloth diapers. The soft spray mode is ideal for women during pregnancy and menstrual cycles to get a gentle and thorough clean up, or baby bath. Such a practical tool beyond imagination!

All Needed Accessories Included
All installation bidet sprayer kits are included, just make sure the water inlet diameter of your toilet tank is 7/8 inch. This bidet sprayer for toilet can be installed in 5 minutes without any professional help.

Full Installation Steps:
*STEP 1: Turn off the water supply valve (on the wall).
*STEP 2: Flush toilet (holding down the handle) to empty the tank completely.
*STEP 3: Disconnect toilet water supply hose from under toilet tank. Put the Flat Rubber Washer inside the nut of the T-valve(7/8" female). Connect T-valve at the toilet tank and reconnect the toilet water supply hose to the bottom of the T-valve(7/8" male). Be sure not to over tighten connections.
*STEP 4: Attach one end of the Bidet Hose(hex nut) to the T-valve(G1/2 male) and the other end to the Sprayer Head .
*STEP 5: Mount Sprayer holder.
*STEP 6: Turn water supply valve back on at the wall, wait 5 minutes and check again. If no leaks, then you are all set!
If there is any problem druring installation, please ask us for help and we will help ypu resolve it.



























