AXP120-X77R Black | 77mm Low-Profile CPU Cooler for ITX Builds

At 77mm tall, the AXP120-X77R Black fits most ITX cases. Six copper heat pipes and reverse airflow direct-exhaust design cut CPU temps by up to 5°C. Supports Intel LGA1851/1700/115X and AMD AM5/AM4.
6 Pure-Copper Heat Pipes, Anti-Gravity in Any Orientation
AGHP 5.0 allows all 6 heat pipes to overcome gravity in both vertical and horizontal orientations, keeping efficiency consistent. Reflow soldering bonds each pipe tightly to the copper base, reducing thermal resistance. The micro-sculpted copper base maximizes CPU contact area, channeling heat rapidly into the pipes.

Reverse Airflow · Dual Orientation · Slim 77mm Profile

Reverse Airflow Design
Reduces CPU temps by up to 5°C vs. conventional intake, easing thermal stress from dual heat accumulation.

Two Install Orientations
Heat pipe bends toward memory supports up to 48mm heatsinks; toward I/O panel supports up to 43mm memory height.

120mm Slim Fan
TL-B12015 EX fan spins up to 3150 RPM, delivering 83.61 CFM airflow at =37.07 dB(A) operating noise.

77mm Low-Profile Height
At just 77mm tall, the AXP120-X77R fits most ITX cases while housing 6 heat pipes and a full aluminum fin stack.
Tech Specifications
Does the AMD platform require the motherboard's original backplate?
Yes. For AMD AM4 and AM5 platforms, the motherboard's original backplate is required for installation. Please keep it on hand before building.
What is the maximum memory height supported in each mounting orientation?
Heat pipe bends facing memory (recommended): supports motherboard heatsinks up to 48mm, no memory height restriction. Heat pipe bends facing I/O panel: maximum memory height supported is 43mm.
Which Intel sockets does the AXP120-X77R support?
The AXP120-X77R supports Intel LGA1851, LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, and LGA2066. All required mounting accessories are included in the package.
Will this cooler fit in an ITX case?
At 77mm tall (L133.5 x W122 x H77mm), the AXP120-X77R is designed for ITX cases. Verify your case's CPU cooler height clearance specification before installing to confirm it fits.
AXP120-X77R Black | 77mm Low-Profile CPU Cooler for ITX Builds

At 77mm tall, the AXP120-X77R Black fits most ITX cases. Six copper heat pipes and reverse airflow direct-exhaust design cut CPU temps by up to 5°C. Supports Intel LGA1851/1700/115X and AMD AM5/AM4.

AGHP 5.0 Anti-Gravity Tech
6 Pure-Copper Heat Pipes, Anti-Gravity in Any Orientation
AGHP 5.0 allows all 6 heat pipes to overcome gravity in both vertical and horizontal orientations, keeping efficiency consistent. Reflow soldering bonds each pipe tightly to the copper base, reducing thermal resistance. The micro-sculpted copper base maximizes CPU contact area, channeling heat rapidly into the pipes.
Reverse Airflow · Dual Orientation · Slim 77mm Profile

Reverse Airflow Design
Reduces CPU temps by up to 5°C vs. conventional intake, easing thermal stress from dual heat accumulation.

Two Install Orientations
Heat pipe bends toward memory supports up to 48mm heatsinks; toward I/O panel supports up to 43mm memory height.

120mm Slim Fan
TL-B12015 EX fan spins up to 3150 RPM, delivering 83.61 CFM airflow at =37.07 dB(A) operating noise.

77mm Low-Profile Height
At just 77mm tall, the AXP120-X77R fits most ITX cases while housing 6 heat pipes and a full aluminum fin stack.
Tech Specifications
| Cooler Dimensions | 133.5 × 122 × 77 mm |
|---|---|
| Cooler Height | 77 mm |
| Fan Dimensions | 120 × 120 × 15 mm |
| Max Fan Speed | 3150 RPM (±10%) |
| Max Airflow | 83.61 CFM |
| Max Static Pressure | 3.4 mm H2O |
| Operating Noise | =37.07 dB(A) |
| Fan Bearing | Dual Ball Bearing |
| Power Connector | 4-pin PWM / DC 12V / 0.4A |
| Compatible Intel Sockets | LGA1851 / LGA1700 / LGA1200 / LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA2011 / LGA2066 |
Does the AMD platform require the motherboard's original backplate?
Yes. For AMD AM4 and AM5 platforms, the motherboard's original backplate is required for installation. Please keep it on hand before building.
What is the maximum memory height supported in each mounting orientation?
Heat pipe bends facing memory (recommended): supports motherboard heatsinks up to 48mm, no memory height restriction. Heat pipe bends facing I/O panel: maximum memory height supported is 43mm.
Which Intel sockets does the AXP120-X77R support?
The AXP120-X77R supports Intel LGA1851, LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, and LGA2066. All required mounting accessories are included in the package.
Will this cooler fit in an ITX case?
At 77mm tall (L133.5 x W122 x H77mm), the AXP120-X77R is designed for ITX cases. Verify your case's CPU cooler height clearance specification before installing to confirm it fits.
















