Your Browsing History
Meet Your Seller
Visit EmpressTech Store
FOLLOW
3S 12V 3A 24W 36W for Lithium Battery UPS Module 3S Charging Discharging Automatic Switching Uninterruptible Power Supply Board
- When the main power supply is cut off, the module will automatically switch to battery power mode to ensure continuous operation of the device; Input voltage: DC12V; Output voltage: DC12V (between 11V and 13V); Output power: 36W (MAX),Battery charging current: 0.5A (MAX)
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Product description 3S 12V 3A 24W 36W for Lithium Battery UPS Module 3S Charging Discharging Automatic Switching Uninterruptible
Power Supply Board Description: Input
voltage: DC12V
Output voltage: DC12V (between 11V and 13V)
Output power: 36W (MAX)
Battery charging current: 0.5A (MAX) The specific input current depends on the load carried, and the working current of the load plus the charging current ( 0.5A ) is the current of the input power supply Equipped with battery pack charging, discharging and discharging protection function Automatic switching of power supply from battery
Matters needing attention: Please connect the battery as the last step, this is very important!!! 3S lithium ion battery or polymer battery or 18650 battery pack
Default battery pack: It can be connected to 2 wires (positive and negative) or 4 wires, and the resistors R16, R17, and R18 need to be removed Please connect the battery as the last step, and use at least 20AWG wire for soldering input and output. The wire length should not exceed 10CM, and the connecting wire should be as thick and short as possible. The control board generates heat during operation, so it should be installed at a certain distance from the battery!
Indicator light: Customers need to configure a 3mm common anode red green light-emitting diode themselves; Charging light on, red light on, fully charged green light on
Power Supply Board Description: Input
voltage: DC12V
Output voltage: DC12V (between 11V and 13V)
Output power: 36W (MAX)
Battery charging current: 0.5A (MAX) The specific input current depends on the load carried, and the working current of the load plus the charging current ( 0.5A ) is the current of the input power supply Equipped with battery pack charging, discharging and discharging protection function Automatic switching of power supply from battery
Matters needing attention: Please connect the battery as the last step, this is very important!!! 3S lithium ion battery or polymer battery or 18650 battery pack
Default battery pack: It can be connected to 2 wires (positive and negative) or 4 wires, and the resistors R16, R17, and R18 need to be removed Please connect the battery as the last step, and use at least 20AWG wire for soldering input and output. The wire length should not exceed 10CM, and the connecting wire should be as thick and short as possible. The control board generates heat during operation, so it should be installed at a certain distance from the battery!
Indicator light: Customers need to configure a 3mm common anode red green light-emitting diode themselves; Charging light on, red light on, fully charged green light on
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EmpressTech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















