Low Profile Bracket UPA2015, MR7MR-USB3.2 Gen2 10G & DisplayPort Alt-Mode PCI Express Host Card with Dual USB Type-C Receptacles Note Low Profile Only

Please check part MR7MR UPA2015 for functionality and compatibility with your equipment. NOTE THAT THIS MODULE HAS A LOW PROFILE BRACKET ONLY.
PCI Express Base Specification Revision 3.0 two-lane (x2). Expands dual external USB3.2 Gen2 Super-Speed plus Type-C port (DFP) on the system. Compliant with Universal Serial Bus 3.2 specification Gen2. Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
Supports simultaneous operation of multiple USB 3.2 Gen2/Gen1, USB 2.0 and USB 1.1 devices Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps. Independent 10G USB PHY for each USB Type-C port. USB port supplies +5VDC / 1.5A power output to USB device with over-current protection.
Compliant with DisplayPort 1.4 spec with HDTV 4K (2160p) resolution and stereoscopic 3D. One USB-C compliant with VESA DisplayPort Alternate Mode for USB Type-C Standard Rev 1.0. Hot-swapping feature allows connect/disconnect device without powering down the system. Driver supports for Microsoft Windows 8.x, 10, and 11 operating systems. Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Driver Support Windows 8.x / 10 (X86/X64) /11(Windows in-box driver)
This is not a video card. The DisplayPort is an input. This card takes the DisplayPort signal and converts it to USB-C to connect USB-C monitors. This is why it's labeled as a DisplayPort Alt Mode card. DisplayPort (DP) Alt Mode is a feature that allows a USB-C port to transmit DisplayPort video signals to a monitor or display. It enables a single USB-C cable to handle video, data, and power, eliminating the need for separate connectors and adapters for video output. Devices that support DP Alt Mode can use the high-speed pins within the USB-C connector to send video, often while simultaneously handling USB data and power.