C&N Single Port 10Gbps PCIe x4 Server NIC Network Card Adapter with Marvell AQC107S Chipset Controller Support Mac

FEATURES

- Compliant with PCIE Express Revision 3.0 and downstream with PCI Express Reivison 2.0

- Supports line rate of 8.0GT/s and 5.0GT/s per lane

- Supports communication and management function

- Integrated Aquantia AQrate PHY featuring NBASE-T technology

- Supports PHY specifications with 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T /100BASE-T.

- On-chip high resolution cable analyzer for advanced cable diagnostics

- Energy Efficient Ethernet (EEE) Support

- Supports IEEE1588v2 Precision Time Protocol

- Support large send offload, Receive Side Scaling (RSS), Direct Cache Access (DCA) and Header checksum for increased network performance and lower host CPU utilization

- Supports IPv4, IPv6 and IPv6/UDP checksum offload

- Supports Jumbo frame (up to 16kbytes)

- Quality of Service (QoS)

- Supports up to eight traffic classes and Data Center Bridging (DCB)

Cabling Requirements:

Intel 10 Gigabit adapters

• For 10GBASE-T on Category 6,Category6a,or Category 7 wiring, twisted 4-pair copper:
• Category 6 wiring supports 55 meters max.
• Category 6a wiring supports 100 meters max.
• Category 7 wiring supports up to 100 meters

Intel 1 Gigabit adapters

• For 1000BASE-T or 100BASE-TX.use Category 5 or Category5e wiring, twisted 4-pair copper:
• Make sure you use Category 5 cabling that complies with the TIA-568 wiring specification For more information on this specification.
• Length is 100 meters max.
• Category 3 wiring supports only 10Mbps

Package content

1x HINYSENO PCIe x4 AQC107S Single- 10G Server NIC

1 x Users Manual

1 x CD driver

1 x Low-profile bracket

Product information