Ethernet Network Serial Port Converter RJ45 to RS232 RS485 RS422 Industrial Device Server Support TCP/RTU/UDP with Power Cable

Ethernet Network Serial Port Converter RJ45 to RS232 RS485 RS422 Industrial Device Server Support TCP/RTU/UDP with Power Supply
Cable Product specification: Model
number: DW-TXI038
Chipset: TXIC/TX210
Port number: 1 port 10/100M Auto MDI-MDIX RJ451 port RS485, 1 port
RS232 Network media: 10Base-T, cat3 or above UTP, 10Base-Tx, cat5
UTP Interface: compatible with RS232 RS422 and RS485 standard
Data rate: 10/100M
Forwarding rate: 10 Mbps / 14, 880 pps, 100 Mbps / 148, 800 pps
Baud rate: 300bps~230400bps
Operation modes: TCP Server, TCP Client, UDP
Power Input: DC5V
Power Consumption: Max 1.5W
LED Indicator: Link/Act, Power, TX/RX
Standard: IEEE 802.3IEEE 802.3 uIEEE 802.3 xIEEE 802.3 az
Support Systems: Windows XP/WIN7/WIN8/WIN10
Other Functions: RS485 support full duplex and half duplex Build load default key
Working Environment: Operating
Temperature: -10 -55
Relative Humidity: 10%-90%(non-condensing)
Storage Temperature: -40-85
Relative Humidity: 5%-90%(non-condensing
Device Default Parameters:
ID: admin
Password: system
IP address: 192.168.
2.1 Operation mode: TCP server
Transmission Mode: RS232
Baud rate: 57600bps
UART parameters: 57600, 8, N, 1
Local port:
TCP: 23, UDP: 21
Load default:
1. Power off the device
2. Hold the load default button
3. Power on the device, hold the button for 10 seconds, then release the default button
Package List: 1x RJ45 to RS232+RS485 converter, 1x Power adapter (The plug will meets your country standard)