TEAR ONE SHEET AT A TIME WIHT ONE HAND
aplus content video
ADHESIVE TAPES/ DRILLING INSTALLATION FOR KITCHEN SINK OR COFFEE CORNER

TWO TENSION ARM
NEWEST DESIGN, There are 6 Springs on both sides to tighten the paper rolls, So you can tear the paper towels with one hand

SIMPLE REPLACE
Very easy to replace your paper towels rolls. The springs on both sides are automatically clamped. so simple

ADAPTIVE DESIGN
Perfect for 11"/28cm paper rolls, Recommended 11"/28cm Kirkland, Bounty, Sparkle

NICE APPEARANCE
The size of the product matches the size of the large paper roll very well, neither too big nor too small
Paper Towels Holder from simpletome
WHAT LENGTH AND DIAMETER PAPER ROLLS ARE SUITABLE ?
Perfect for length 11"/28cm, less than 6"/15cm in diameter rolls, but also suitable for 9.5~11.8" (24~30cm) paper towels roll. Functionality is not affected, but not good looking. Recommended kirkland, bounty, sparkle, presto!
HOW TO REMOVE AFTER USING ADHESIVE ?
First heat the sticker with a hair dryer for 1-2 minutes, then use a utility knife to cut along the edge of the sticker, push it hard to the inside of the wall to remove it.
HOW TO ASSEMBLE IT CORRECTLY ?
Please watch the product assembly video or manual first, please remember, after the correct assembly, the back of the product is flat, no screws emerge.
HOW TO CHANGE THE INSTALLATION LOCATION ?
The adhesive tape is very strong. Please choose a satisfactory installation position before installation. You can apply it gently with adhesive tape first. After confirming that the position is correct, press hard to reinforce.

simpletome
Make Home More Like Home, NOT Just A House
simpletome
Make Home More Like Home, NOT Just A House
ONE HAND TEAR Paper Towel Holder
ONE HAND TEAR Paper Towel Holder
ONE HAND TEAR Paper Towel Holder
- tear one sheet at a time
- adjustable adaptive tension arms
- perfect for 11inch/28cm paper towels rolls
- tear one sheet at a time
- adjustable adaptive tension arms
- perfect for 11inch/28cm paper towels rolls
- tear one sheet at a time
- adjustable adaptive tension arms
- perfect for 11inch/28cm paper towels rolls
TEAR ONE SHEET AT A TIME WIHT ONE HAND
aplus content video
ADHESIVE TAPES/ DRILLING INSTALLATION FOR KITCHEN SINK OR COFFEE CORNER

TWO TENSION ARM
NEWEST DESIGN, There are 6 Springs on both sides to tighten the paper rolls, So you can tear the paper towels with one hand

SIMPLE REPLACE
Very easy to replace your paper towels rolls. The springs on both sides are automatically clamped. so simple

ADAPTIVE DESIGN
Perfect for 11"/28cm paper rolls, Recommended 11"/28cm Kirkland, Bounty, Sparkle

NICE APPEARANCE
The size of the product matches the size of the large paper roll very well, neither too big nor too small
Paper Towels Holder from simpletome
![]() Paper Towel Stand ST28 | ![]() Paper Towel Stand ST20B | ![]() Paper Towel Stand ST29 | ![]() Wall/Under Cabinet V20L | ![]() Wall/Under Cabinet V06S | ![]() Wall/Under Cabinet V06B | ![]() Wall/Under Cabinet V01 |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| FOR ROLL LENGTH | ||||||
| 7.8-11.8inch/20-30cm | 7.8-11.8inch/20-30cm | 7.8-11.8inch/20-30cm | 9.4-11inch/24-28cm | perfect for 11inch/28cm | perfect for 11inch/28cm | 2.36-11inch/6-28cm |
| ONE HAND TEAR | ||||||
| ? | ? | ? | ? | ? | ? | ? |
| WEIGHT | ||||||
| HEAVY DUTY 1500g | 900g | HEAVY DUTY 1400g | 350g | 480g | 480g | 480g |
| MATERIAL | ||||||
| Metal+ABS | SUS304 Stainless Steel | Metal+ABS | ABS | ABS+Aluminum Alloy | ABS+Aluminum Alloy | SUS304 Stainless Steel |
| ADHESIVE/DRILLING | ||||||
| ? | ? | ? | ? | ? | ? | ? |
WHAT LENGTH AND DIAMETER PAPER ROLLS ARE SUITABLE ?
Perfect for length 11"/28cm, less than 6"/15cm in diameter rolls, but also suitable for 9.5~11.8" (24~30cm) paper towels roll. Functionality is not affected, but not good looking. Recommended kirkland, bounty, sparkle, presto!
HOW TO REMOVE AFTER USING ADHESIVE ?
First heat the sticker with a hair dryer for 1-2 minutes, then use a utility knife to cut along the edge of the sticker, push it hard to the inside of the wall to remove it.
HOW TO ASSEMBLE IT CORRECTLY ?
Please watch the product assembly video or manual first, please remember, after the correct assembly, the back of the product is flat, no screws emerge.
HOW TO CHANGE THE INSTALLATION LOCATION ?
The adhesive tape is very strong. Please choose a satisfactory installation position before installation. You can apply it gently with adhesive tape first. After confirming that the position is correct, press hard to reinforce.




































































