ASCO 8210G003 Solenoid Valve, 2-Way, 2-Position, Normally Closed, 3/4 in Pipe

California Proposition 65: This product contains a chemical known to the State of California to cause cancer. California Proposition 65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

The ASCO 8210G003 is a pilot-operated, 2-way/2-position solenoid valve designed with a normally closed starting configuration. It uses an energized coil to actuate the valve, controlling the flow of air, inert gases, light oil, and water across its 3/4 inch orifice. Valve body material: Brass. Includes coil and seals. Suitable for use in systems handling air, inert gases, light oil, and water within the specified operating ranges (min 5 psi; max 125 psi for air/inert gas; 100 psi for light oil; 150 psi for water; ambient temperature 14°F to 140°F; fluid temperature up to 180°F). Mounting orientation: Vertical. Actuation time: 1 second.

Key Features:

• - Valve Type: High Flow, Pilot Operated
• - Valve Design: 2-Way/2-Position with Normally Closed configuration
• - Fluid Compatibility: Air, Inert Gases, Light Oil, Water
• - Orifice Diameter: 3/4 in
• - Body Material: Brass
• - Operating Pressure Differential: Minimum 5 psi; Maximum 125 psi (Air/Inert Gas), 100 psi (Light Oil), 150 psi (Water)
• - Voltage: 24 V DC with 6.1 W coil wattage
• - Coil Enclosure: IP66-rated
• - Electrical Connection: 1/2 in Conduit Hub
• - Seal Material: NBR (Buna-N)
• - Ambient Operating Temperature Range: 14°F to 140°F
• - Fluid Temperature Maximum: 180°F
• - Environmental Rating: Indoor and Outdoor use
• - NEMA Enclosure Rating: 1, 2, 3, 3S, 4, 4X
• - IP Rating: 66
• - Includes: Coil and Seal
• - Mounting Orientation: Vertical
• - Dimensions: 4-3/16 in height, 3-7/16 in length, 2-3/4 in width
• - Standards: UL Listed

. This item has been restricted from sale in the following state(s): []