N130BAT-3 Laptop Battery for Clevo B1301 N130BU N130WU N131BU N131WU NP3130

About MULS
1. We have professional battery and adapter experience!
Strictly test before shipment to ensure full capacity and safety without harming the computer!
2. We recommend that the first charge is not less than 5 hours.
3. The new battery cannot be charged, is there a problem with the battery?
Usually not. The computer charges the battery for the first time. Due to the instability of voltage and current, the computer may stop charging the battery when the battery is half charged (sometimes more, sometimes less). If this happens, Don't worry, just take the battery out of the computer and recharge it again. The new battery charged for the first time may require several iterations. Don't worry, this is normal.
4. When the battery is in normal operation, if the battery is discharged to 3%, it must be shut down or recharged. If the battery is discharged to 0%, the battery will be damaged and its life will be attenuated.
5. Avoid falling, heating, and short-circuit, avoid using the battery in an environment where the temperature is too high or too low.
Specification:

Voltage:11.4V
Capacity: 36Wh 3100mAh 3-Cells
Condition: Brand new from manufacture, Grade A cell
Replacement for Part Number

6-87-N130S-3U9
6-87-N130S-3U9A
687N130S3U9
687N130S3U9A
N130BAT-3
N130BAT3
Compatible Laptop Models:
Fit for Clevo Series

Clevo B1301(N130WU)
Clevo Office B1401(N141ZU)
Clevo Office B1504(N151ZU)
Clevo N130BU N130WU N131BU N131WU NP3130
Fit for HAIER Series
HAIER lingyue S4 series

HAIER lingyue S4-44154G500GWUS
HAIER lingyue S4-72008G628GWUS
Fit for Tuxedo Series

Tuxedo System76 Galago Pro
Tuxedo System76 Galago Pro 2
Tuxedo System76 Galago Pro 3
Tuxedo InfinityBook Pro 13 V2
Tuxedo InfinityBook Pro 13 N130BU
Tuxedo InfinityBook Pro 14 V3
Fit for Sager Other Series

Sager NP3132(N130WU)
Sager NP3141(N141WU)
Sager NP3145(N141WU)
Sager NP3146(N141ZU)
Sager NP3155(N151ZU)
Sager NP3156(N151ZU)
Note: Please open the back cover of your laptop to check the original battery size and capacity before placing an order.
1. Turn off your laptop and disconnect the power.
2. Disconnect the connection between the old battery and the motherboard to avoid unnecessary damage caused by disassembling the battery. Then unscrew the old battery screws one by one and carefully save each screw.
3. Remove the old battery, carefully connect the new battery to the mainboard, reinstall all the parts that have been removed earlier, and connect the wiring of the new battery.
4. If you don't understand the above steps, you can search the relevant installation tutorial video on YouTube for help.
1. New battery: Discharge the new battery to 10% (not 0%), then charging up to 95% and repeat 3-4 times to activate the maximum capacity.
2. Overuse: Do not always run out of a battery to 0%, that would damage the battery or shorten the usage life.
3. Charging sequence: when charging, first install the battery, then turn on the power, when fully charged, first cut off the power, then pull the power plug.
4. Fully charge the battery before long-term storage, and keep charging once a month.
Do not store the battery at low power circumstances.
Could be caused by battery loss. Please re-install the battery and make sure that the battery cable and the motherboard interface are tightly inserted.
Maybe due to conductive material damage which the laptop motherboard and battery anode and cathode contact position, you can try to confirm it with your original battery.
Check whether the battery drive is in normal condition, if not, download the corresponding driver software to update.
MULS N130BAT-3 Replacement Battery How to Install A New Battery: Tips for Battery Maintenance: Why the laptop does not recognize the battery