75Wh C41N2304 Laptop Battery Compatible with Asus Vivobook S 14 OLED M5406 M5406WA 15 S5507 16 S5606 S5606MA M5606 M5606KA ZenBook 14 UM3000 UM3406 UM3406HA Series [15.56V 4825mAh 4-Cell]

INTIFO-branded parts ensure compatibility, reliability, quality, security in your laptop system.
Condition: Brand New
Model: C41N2304
Voltage: 15.56V
Capacity: 75Wh
Cells: 4-Cell
Battery Type: Li-ion
Replacement for Part Number:
C41N2304 0B200-04480200 4ICP5/49/121
Compatible with Laptop Models:
Asus ZenBook 14 UM3000 Series,
Asus Zenbook 14 OLED UM3406 UM3406HA Series,
Asus VivoBook S 14 OLED M5406 M5406WA Series,
Asus Vivobook S 15 S5507 Series,
Asus Vivobook S 16 S5606 S5606MA M5606 M5606KA Series
1.Better compound materials, high pressure resistance, high temperature resistance, high power, radiation resistance, stronger conductivity, faster working speed, lower working loss.
2.High energy density -- potential for higher capacity.
3.Does not require a long startup when new. Charge it regularly is enough.
4.Low maintenance -- no need for regular discharge, no memory.
5.Special batteries can provide very high current for power tools and other applications.
Always on the go?
No more worries about running out of battery power!
You can power your Laptop with Lithium-ion Battery from INTIFO, these High-Performance Lithium-ion Batteries let your Laptop work seamlessly when you are on the move.
Q:Why my notebook can't recognize this battery or it doesn't seem to work when installing?
A:1.Please check if the interface is clean to make sure it is fully connected.
2.The residual power stored in the laptop components which was preventing the battery from working properly. Please disconnect the old battery, and hold down the power button for 20 seconds, then connect the new battery. This drains the residual or flea power and the battery will be functional properly once it's reassembled.
1.Turn off your laptop and disconnect the power.
2.Disconnect the connection between the old battery and the motherboard, then unscrew screws of the old battery one by one and save them carefully.
3.Remove the old battery, then install the new battery carefully to its position, reset and tighten the removed screws, and connect the cable of the new battery.
4.Tips:Please discharge the new battery to 5% (not 0%), then charge fully and cycle 3-4 times to wake up the new battery.
Welcome to TAINOVO INC from the USA with registered brand INTIFO Specifications Compatibility 3rd Generation Smart Chip for INTIFO-branded Parts INTIFO's goal is to exceed your expectations. Installing new battery frequently asked question solution: Correct ways to install a new battery: