A1819 Battery for MacBook Pro 13 inch A1706 Late 2016 Mid 2017 MLH12LL MLH12LL/A

SpecificationBattery type: Li-ion polymer.
Battery Color: Black.
Capacity: 49.2W h/4314mAh.
Voltage: 11.4V. 100% New from Manufacturer. Up to 500 recharge cycles over the life of the battery.
Compatible Part NumberA1819, A1706, A1706 (EMC 3071), A1706 (EMC 3163), 020-01705.
Compatible ModelsMacbook Pro 13" inch A1706 Late 2016 Mid 2017 with Touch Bar Version MLH12LL/A MLVP2LL/A MNQF2LL/A MNQG2LL/A MPXV2LL/A MPXW2LL/A MPXX2LL/A MPXY2LL/A.
Attention The battery disassembly of this MacBook is a bit complicated, especially removing the glued battery from the MacBook Pro. We recommend that you search for related battery replacement videos on the Internet in advance, or seek the help of professional technicians when installing the battery. We will not take any responsibility for any damage caused by improper operation. Hope to understand.


Compatible Laptop Models:
MacBook Pro 13" inch A1706 (Late 2016 Mid 2017) with Touch Bar Version
MacBook Pro 13" inch A1706 (EMC 3071) (Late 2016) Series
MacBook Pro 13" inch A1706 (EMC 3163) (Mid 2017) Series
MacBook Pro Core I5 2.9 13" inch with Touch Bar A1706 (Late 2016) Series
MacBook Pro Core I5 3.1 13" inch with Touch Bar A1706 (Late 2016) Series
MacBook Pro Core I5 3.1 13" inch with Touch Bar A1706 (Mid 2017) Series
MacBook Pro Core I5 3.3 13" inch with Touch Bar A1706 (Mid 2017) Series
MacBook Pro Core I7 3.3 13" inch with Touch Bar A1706 (Late 2016) Series
MacBook Pro Core I7 3.5 13" inch with Touch Bar A1706 (Mid 2017) Series
MacBook Pro 13" inch MLH12LL/A MPXV2LL/A MLVP2LL/A MNQF2LL/A MNQG2LL/A MPXW2LL/A MPXX2LL/A Series
How to Install A New Battery:
1. Before disassembling your MacBook Pro put the battery charge below 25%. If a fully charged lithium battery is accidentally punctured, it will have serious consequences.

2. Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.

3. Use a P5 Pentalobe driver to remove the six screws securing the lower case.

4. Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.


5. The bottom case has hidden buckles, please carefully separate the buckles that fix the bottom case. Then the bottom shell was successfully removed.


6. Please note that before removing the old battery, disconnect the battery cable from its socket.


7. Slide the battery data cable out of its slot to disconnect it.


8. Due to the limitation of the number of texts, we suggest you search for "A1819 A1706 battery replacement" on the Internet.


Easy to deal a variety of use environment

Please Pay Attention:
1. This battery is compatible with MacBook Pro 13" A1706 (Late 2016 Mid 2017) with Touch Bar Version. Please check that the model number on the back of your Macbook is A1706, and your MacBook is Touch Bar Version.

2. The tools for repairing are included, the adhesive tapes are pre-attached.

3. The battery disassembly of this MacBook is a bit complicated, especially removing the glued battery from the MacBook Pro. We recommend that you search for related battery replacement videos on the Internet in advance, or seek the help of professional technicians when installing the battery. We will not take any responsibility for any damage caused by improper operation. Hope understand.

Laptop battery instruction:
1. Please use the remaining battery capacity to reach 10-15% for the first time. Then fully charge the battery, use it up. This process can be cycled 3 -5 times, which is beneficial to comprehensive to activate maximum capacity of lithium ions.

2. Do not disassemble, crush or puncture. Do not dispose of in fire or water.

3. If you remove battery for a long time, charge more than 80% at least one time within one months.

4. Don't connect adapter for a long time while using the battery. It may damage the battery.

5. When using the battery, care should be taken to prevent exposure and moisture.

The following are troubleshooting methods:
1. Turn off the laptop.

2. Unplug AC power.

3. Remove the battery.

4. Replace AC power.

5. Turn on laptop, allow OS to boot.

6. Once logged in to the machine, perform a normal shut donw.

7. Unplug AC power.

8. Replace battery.