Elecom EDC-GUA3H2-B Wired LAN Adapter, USB 3.0, USB-A, USB to RJ45 Converter Adapter, Gigabit USB Hub (USB-A x 3 Ports), Compatible with Windows 11/10/8.1, MacOS 12/11/10.15, Black

Specifications:
Supported OS (Windows): Windows 11/Windows 10/Windows 8.1
Supported OS (Mac): macOS Monterey 12 / macOS Big Sur 11 / macOS Catalina 10.15
Wired Standard: IEEE802.3ab (1000BASE-T) Compliant, IEEE802.3u (100BASE-TX) Compliant, IEEE802.3 (10BASE-T) Compliant, IEEE802.3x (Flow Control) compliant
Wired Connector: RJ-45 x 1 port *Auto MDI/MDI-X, Auto-Negotiation compatible
Wired transmission speed (theoretical value): 1000Mbps/100Mbps
Access Method: CSMA/CD
Supported protocols: IPv4, IPv6
USB Interface: USB3.2 (Gen1), USB3.1 (Gen1), USB3.0, USB2.0, USB1.1.
Maximum Transfer Rate: USB3.2 (Gen1) Super Speed/5Gbps, USB 2.0 High Speed/480Mbps, USB 1.1 Full Speed/12Mbps
USB port (device end): USB-A (male) x 1 port
USB port (HUB side): USB-A (female) x 3 ports
Supply current: USB 3.0 connection: 3 ports total within about 600mA when connected to USB 2.0: 3 ports total within about 300mA
Rated input: bus power 5V
External Dimensions (W x D x H): Approx. 3.6 x 1.6 x 0.6 inches (91 x 41 x 16 mm) (excluding cable part)
USB Cable Length: Approx. 11.8 inches (30 cm) (excluding connectors)
Weight: Approx. 2.0 oz (56 g).
Housing Material (Color): Plastic (Black)
Operating environment: Temperature: 32 - 104°F (0 - 40°C), Humidity: Less than 85% (but without condensation)
Certification Standards: VCCI class B
Accessories: Set up Guide
Compatible software: MAC address changer

Description
USB 3.2 Gigabit LAN adapter with USB hub that is ideal for low-profile computers without wired LAN ports and lack of USB ports.
The USB hub part has 3 ports of USB 3.0 ports (USB-A) for high-speed transfers.
The combination of Gigabit communication using Gigabit LAN adapter and USB 3.0 computer connection portion, compared to conventional products with USB 2.0 (EDC-FUA2H-B), the downloaded data can be transferred at a speed of 14.3 times (actual value).
No need to install drivers, just connect the LAN adapter to your computer to use it.
By using the "MAC Address Changer" software that can change the MAC address of this product (download from our website) that allows you to use this product even in environments where you can only communicate with pre-registered MAC addresses such as offices. (Compatible with Windows only)
The length of the cable is 30cm which is easy to connect other products to the USB hub.

Product inquiries
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception Time / 10:00 - 19:00 24/7