CANable USB to can Module can Debugging Assistant can Bus Analyzer Isolation(CANable Pro with Isolation chip)

Warm reminder: Our store provides CANable open source code, user manuals, simple tutorials, etc. Users can conduct second development based on the provided information, but our store does not recommend users without basic knowledge to modify the firmware.
Product introduction
The CANable V1.0 module is an upgraded version of CANable that can communicate at a data rate of up to 1 Mbit/s in the CAN fast stage. It is very suitable for product debugging, CAN bus control, and high-speed CAN applications in the automotive industry.
The CANable Pro V1.0 module is an upgraded version of the CANable V1.0 module. Under the premise of high-speed transmission rate and high operational stability, the CANable Pro V1.0 module has stronger anti-interference ability and is very suitable for industrial debugging or motor field applications.
CANable PCAN is a CAN-to-USB adapter whose factory firmware is PCAN. This firmware version fixes the bus blocking error of CANable's official PCAN firmware. Now it can realize CAN bus communication smoothly as a PCAN device.
Product Notes
CANable PCAN and CANable Pro PCAN are adapters whose factory firmware is PCAN and their hardware is exactly the same as CANable and CANable Pro respectively; no responsibility is assumed for this;
The PCAN version adapter is not allowed to download or upload firmware. If any operation on the internal program of the product causes it to fail to function normally, the PCAN firmware cannot communicate with the stepper motor series host computer. Please choose carefully!
Features
1. CANable V1.0 fully supports PCAN.
2. CANable V1.0 and CANable Pro V1.0 modules use high-performance ARM°Cortex-MO STM32F072 processor with a running frequency of up to 48 MHz.
3. The CANable V1.0 communication chip uses the highly integrated chip TJA1051T/3, with a CAN data rate up to 1 Mbit/s. The CANable Pro V1.0 communication chip uses the ADM3053BRWZ fully isolated chip, with high common-mode transient immunity >25kV/us, which enhances the anti-interference performance.
4. CANable V1.0 supports up to 32 devices connected to the PC at the same time. The CANable Pro V1.0 bus supports 110 or more nodes, and unpowered nodes do not interfere with the bus.
5. CANable V1.0 is disconnected from the bus when not powered on (zero load). CANable Pro V1.0 features 2.5 kV rms signal and power isolation.
6. The power supply voltage stabilizing chip uses LP5907MFX-3.3 low-noise LD0, with an output current up to 250mA.
7. With thermal shutdown protection function.
8. Use USB interface for power supply and communication.
9. There is no need to install drivers for Windows and Linux systems.