USB 3.0 Extender Over Ethernet 330ft USB 3.2 Gen1 5Gbps 4-Port Hub

This USB 3.2 & 3.0 Extender enables the use of USB devices up to 100 meters from a host computer. It uses a single Cat 6a/7 F/FTP or U/FTP cable to achieve data transmission speeds up to 5Gbit/s and is compatible with older USB 2.0 and 1.1 devices. The receiver unit includes a built-in 4-port hub, with one port providing 1.5A for higher-power devices like cameras.
A key feature is the two-way PoH+, allowing you to power both the transmitter and receiver by plugging in just one power adapter at either end, which is ideal for remote locations.
It also supports RS232 and FSYNC GPIO pass-through for controlling industrial cameras. With a pure hardware design and plug-and-play operation, it works without drivers across various operating systems.
Extend your USB connectivity up to 100 meters while maintaining USB 3.2 Gen 1 performance with data rates up to 5Gbit/s. Using a single Cat 6a/7 F/FTP or U/FTP cable, this solution delivers reliable, high-speed connections for your USB peripherals. The system maintains full backward compatibility with previous USB 3.0, USB 2.0, and USB 1.1 standards, ensuring broad device support across your existing equipment portfolio.
The receiver features a 4-port USB hub, including one 1.5A port for high-power devices like cameras. With two-way PoH+, only one power adapter is needed at either the transmitter or receiver to operate both units, simplifying installation in locations with limited power access.
Features RS232 and 3.3V FSYNC GPIO pass-through for industrial camera control. The pure hardware design supports all USB transfer protocols and offers driver-free operation across multiple operating systems for immediate functionality upon connection.
Extends USB 3.2 & 3.0 signals up to 100 meters over a single Cat 6a/7 cable.
Supports data transmission rates up to 5Gbit/s for high-speed connectivity.
Backward compatible with existing USB 3.0, USB 2.0, and USB 1.1 standards.
Two-way PoH+ allows powering both units with a single adapter at either end.
Supports RS232 and FSYNC GPIO pass-through for industrial camera control.
Receiver features four USB3.2 hubs, including one high-power 1.5A port.
Plug-and-play operation requires no driver installation for easy setup.
Connect VR headsets, external hard drives, and gaming accessories to your PC from another room. The 100m extension over CATx cable and 5Gbit/s speed support high-bandwidth devices, while the 4-port hub allows multiple peripherals to operate simultaneously.
Install USB security cameras at long distances from the monitoring station. The two-way PoH+ enables powering both units from either end, while maintaining stable USB 3.2 connectivity for continuous video streaming and camera control.
Connect industrial cameras and measurement devices to a central control system in factory environments. The RS232 and FSYNC GPIO support enables precise equipment triggering, while USB 3.2 speeds handle high-resolution image data transfer.
Centralize computers while extending USB connectivity to workstations. The 4-port hub supports printers, scanners, and security dongles, with 100m range covering large office spaces through structured cabling.
Transmitter Ports 1 x USB HOST , 1 x RS232 & FSYNC, 1 X USB3-LINK (RJ45), 1 x POWER, 1 x FW (Micro-USB) Receiver Ports 4 x USB DEVICE, 1 x RS232 & FSYNC , 1 X USB3-LINK (RJ45), 1 x POWER, 1 x FW (Micro-USB) USB Standard USB 3.2 Gen1, and backward compatible with USB 3.0, USB 2.0, and USB 1.1 standards Data Rate Up to 5Gbit/s Operating Temperature 0°C to 45°C (32°F to 113°F) Power Supply 20V/3A Power Consumption (Max) 31.28W (Pair, USB fully loaded) Dimension (W x H x D) Transmitter/Receiver: 150mm x 20.5mm x 100mm / 5.9 x 0.81 x 3.94 Product Weight Transmitter: 0.35kg/0.77lb, Receiver: 0.34kg/0.75lb 100m USB 3.2 Extender with 4-Port Hub, 5Gbit/s over Cat6a/7 , Two-Way PoH for Flexible Powering Extend your USB 3.2 Gen1/3.0 dev