USB RS232 Adapter to Wire End Cable Chipset Serial Output Cable Support Win10 Vista Win8/7/android/xp/2000/M/linux, 6FT, Black

Usb to rs232 adapter to wire end cable ftdi rs232 6pin plug converter cable support Win10 vista win8/7/android/xp/2000/M/linux usb rs232 6P wire end cablelength:6ftPin Assignment: dark-GND, Orange-TXD,Yellow-RXD, Red-VCC,CTS-Brown, RTS-GreenSupport win10/8/7/xp/2000/vista/M/linux/androidUSB to 6PIN RS232 Wire end cable, Not TTL RS232 PCBA Module inside of USB housing Package Included : 1 x usb rs232 6pin wire end cableThe FT232R is the latest device to be added to FTDI range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip Compatible With some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied. Single chip USB to asynchronous serial data transfer interface. Entire USB protocol handled on the chip - No USB-specific firmware programming required. UART interface support Compatible With 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. Fully assisted hardware or X-On / X-Off software handshaking. Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232). In-built support Compatible With event