Your Browsing History
Meet Your Seller
F&T>D*I FT231XS USB to RS232 3.5mm Stereo Ja-ck pl-UG Serial Converter Adapter Upgrade Board Cord
- FT231XS+ZT213 Chipset for Reliable Performance Equipped with the FT231XS+ZT213 chipset, this adapter ensures stable and efficient USB to RS232 conversion with minimal latency and high compatibility across systems.
- 6ft cord Length for Flexible Connectivity Featuring a 6ft cord length, this serial adapter offers ample reach for connecting devices without strain, ideal for desktop setups and industrial applications.
- USB to 3.5mm Ja-ck Serial Converter as a USB to 3.5mm Ja-ck serial cord, it enables RS232 devices to via USB ports using standard Ja-ck interfaces.
- Pin Assignment: Tip-RX, Ring-TX, Sleeve-GND The precise Tip-RX, Ring-TX, Sleeve-GND pin configuration ensures correct sig/nal routing for reliable data transmission between devices.
- Supports Multiple Operating Systems Compatible with 10, 7, 8, XP, 2000, An/dro/id, , and Linux, making it a versatile solution for diverse computing environments.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
F&T>D*I FT231XS USB to RS232 3.5mm Stereo Ja-ck pl-ug Serial Converter Adapter Upgrade Board cord
usb to 3.5mm rs232 serial conveter cord
Length :6ft available
Pinout : TIP-RX, Ring-TXD, Sleeve-GND
Support win10 win8 win7 vista xp An/dro/id linux etc
driver download: www.ftdichip.com
About F&T>D*I FT231
FT231X Full Speed USB to Full Handshake UART
Key Hardware Features
This USB2.0 Full Speed IC offers a compact bridge to full handshake UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8mA). The FT231X includes the complete FT-X series feature set and enables USB to be added into a Sys/tem design quickly and easily over a UART interface.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte EEPROM for storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud.
512 byte receive buffer and 512 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
F&T>D*I's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers the requirement for USB driver development in most cases.
Configurable CBUS I/O pins.
Transmit and receive drive signals.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
Bat*/tery Detection. May be used by mobile devices to detect the presence of a on the USB port to enable higher current / faster of batteries.
Device supplied pre-programmed with USB serial number.
Supports bus powered, self powered and high-power bus powered USB configurations.
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input.
(operates down to 1V8 with external pull and is also 5V tolerant)
Configurable I/O pin output drive strength.
Integrated power-on-reset circuit.
UART sig/nal inversion option.
Internal 3.3V/1.8V LDO regulators
Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) current.
Low USB bandwidth consumption.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
Extended operating temperature range: -40°C to 85°C
Available in compact Pb-free 20 Pin SSOP and QFN packages (both compliant).
Typical Applications
USB to RS232/RS422/RS485 Converters
Upgrading Peripherals to USB
Cellular and Cordless USB data transfer cables and interfaces
Interfacing MCU/PLD/FPGA based designs to USB
USB and Low Bandwidth Video data transfer
PDA to USB data transfer
USB Sma/*rt Card Readers
USB Instrumentation
USB Industrial Control
USB MP3 Player Interface
USB FLASH Card Reader and Writers
Set Top Box PC USB interface
USB Digital Camera Interface
USB Hardware Modems
USB Wireless Modems
USB Bar Code Readers
Dedicated Port (DCP) detection enabling Bat*/tery at higher current for faster times.
TY>pe : Serial cord
Color : Black
Length : 6ft
Connector : USB to 3.5mm Ja-ck
sig/nal Level : RS232
Chipset : FT231XS+ZT213
Pin Assignment : Tip-RX, Ring-TX, Sleeve-GND
Sys/tem Support : Win10 7 8 xp 2000 An/dro/id Linux
Feature : usb rs232 Ja-ck
Feature 01 : usb to 3.5mm serial cord
usb to 3.5mm rs232 serial conveter cord
Length :6ft available
Pinout : TIP-RX, Ring-TXD, Sleeve-GND
Support win10 win8 win7 vista xp An/dro/id linux etc
driver download: www.ftdichip.com
About F&T>D*I FT231
FT231X Full Speed USB to Full Handshake UART
Key Hardware Features
This USB2.0 Full Speed IC offers a compact bridge to full handshake UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8mA). The FT231X includes the complete FT-X series feature set and enables USB to be added into a Sys/tem design quickly and easily over a UART interface.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte EEPROM for storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud.
512 byte receive buffer and 512 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
F&T>D*I's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers the requirement for USB driver development in most cases.
Configurable CBUS I/O pins.
Transmit and receive drive signals.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
Bat*/tery Detection. May be used by mobile devices to detect the presence of a on the USB port to enable higher current / faster of batteries.
Device supplied pre-programmed with USB serial number.
Supports bus powered, self powered and high-power bus powered USB configurations.
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input.
(operates down to 1V8 with external pull and is also 5V tolerant)
Configurable I/O pin output drive strength.
Integrated power-on-reset circuit.
UART sig/nal inversion option.
Internal 3.3V/1.8V LDO regulators
Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) current.
Low USB bandwidth consumption.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
Extended operating temperature range: -40°C to 85°C
Available in compact Pb-free 20 Pin SSOP and QFN packages (both compliant).
Typical Applications
USB to RS232/RS422/RS485 Converters
Upgrading Peripherals to USB
Cellular and Cordless USB data transfer cables and interfaces
Interfacing MCU/PLD/FPGA based designs to USB
USB and Low Bandwidth Video data transfer
PDA to USB data transfer
USB Sma/*rt Card Readers
USB Instrumentation
USB Industrial Control
USB MP3 Player Interface
USB FLASH Card Reader and Writers
Set Top Box PC USB interface
USB Digital Camera Interface
USB Hardware Modems
USB Wireless Modems
USB Bar Code Readers
Dedicated Port (DCP) detection enabling Bat*/tery at higher current for faster times.
TY>pe : Serial cord
Color : Black
Length : 6ft
Connector : USB to 3.5mm Ja-ck
sig/nal Level : RS232
Chipset : FT231XS+ZT213
Pin Assignment : Tip-RX, Ring-TX, Sleeve-GND
Sys/tem Support : Win10 7 8 xp 2000 An/dro/id Linux
Feature : usb rs232 Ja-ck
Feature 01 : usb to 3.5mm serial cord
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by PartsPro Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...