VAIGAI m/ic-r/o-USB to UART TTL Module 6Pin Serial Converter CP2102 STC & 50W Dummy Load N Female Socket DC 1 3GHz 50 Ohm

m/ic-r/o-USB to UART TTL Module 6Pin Serial Converter CP2102 STC &50WDummyLoad N Female Socket DC 1 3GHz 50 Ohm

set2: 1 x Dummy Load + 1 x m/ic-r/o-USB to UART TTL Module 6Pin Serial Converter CP2102
the chip CP2102, generate COM port after installing the driver
then the standard input M-INI m/ic-r/o-USB cable connected to the computer USB interface, with 3.3V and 5V two power output
with a resettable fuse
In the event of accidental short-circuit can effectively your device and computer USB port to download
Colour: Black/blue
Material: aluminum + stainless steel/CCL
the communication format support: 1) data bits 5,6,7,8; 2) support 1.5, 2 stop bits; 3) odd, even, mark, space, none parity
supported operating systems: windows 8.1 / 7 / vista / xp / 98, Ma/c OS-X / OS-9, Linux
USB seat M-INI m/ic-r/o-USB interface Block
chip co/mpone/nts Fit Compatible the regular company of welding, stable quality, beautiful appearance
with DTR trigger signal output can be directly ar/du-ino pro M-INI ATMEGA328P and other ar/du-ino board download traffic
module size: 16mm x 20mm super small
embedded USB transceiver, no external circuit device
containing clock circuit, no external circuit device
contains power-on reset circuit
The on-chip voltage regulator within the 3.3V output
Meet the USB2.0 specification requirements
SUSPEND pins support USB suspend state
asynchronous serial data bus compatible with all handshakes and modulation controller interface signals
Support data format is 8 data bits, 1 stop bit and the parity bit
connotation 512 byte receive buffer and 512 byte transmit buffer
Supports hardware or X-ON / X-OFF Handshake
How to install the driver
STC Replace FT232
Power dissipation 50 watts
Frequency DC-3000MHz
Connector N-Type Socket
50 Ohms impedance
Package Contents:
1 x Dummy Load
1 x m/ic-r/o-USB to UART TTL Module 6Pin Serial Conver