PLC MPI/DP/PPI Programming Cable for Siemens S7 200/300/400 S7-200 S7-300 S7-400 6ES7 972-0CB20-0XA0 USB-MPI+ PC USB-PPI,USB/MPI PC Adapter USB Cable

Model: 0CB20 compatible (6ES7 972-0CB20-0XA0)
Interface: USB-9 pin male
System: Perfect support for XP WIN7 VISTA
Complete set: packing box + adapter + standard wiring
Purpose: Support PPI/MP and DP multi-master communication, used for Siemens S7200/300/400 and Siemens department touch (TP170/177/270, OP25/35/77, MP177/270/277B, etc.)
Support 0CB20 eight generations of operating systems: Windows2000/ Win 2003 / Windows XP / Vista / windows 7 32bit / 64 bit. Support 0CB20 eight generations of programming software version: STEP7 V5.2 and higher, STEP7 Micro / Win 4.0 and above
Full-speed USB device interface, compatible with USB V2.0 specification. USB port with anti-surge protection
Power: USB bus powered, power consumption of about 100mA, with overcurrent protection and surge protection
Optical Isolation voltage: 1000VDC
Support for MPI baud rate: 19.2Kbps, 187.5Kbps automatically adapt
Support PPI baud: 9.6Kbps, 19.2Kbps, 187.5Kbps automatically adapt
Support for long-distance communications, the maximum communication distance of 1000 m (RS485 end, when the baud rate is 187.5Kbps)
LEDs with power, data reception indicator, the data transmission indicator
Each PC only supports a programming cable 0CB20 Yashiro
1.Support the Siemens S7-200 / 300/400 PLC communications.
2.The signal partially isolated by high-speed optical coupling.S
3.upport for MPI and DP multi-master communication, support Siemens touch screen.
4.Support for multi-master communication 200PLC and ET200 communications, and PPI.
5.Support 840D CNC system programming.
6.The installation of Siemens original driver, without generating serial, USB direct selection
7.Support WIN7 32 and 64 series, support V5.5 software (no need to install the drive in V5.5)
8.There are soft shell protection, anti-pressure, drop.
9.The choice of PTC resettable fuse, overvoltage, overcurrent, short circuit case well protected internal circuitry.
10.Support a variety of high-end communication Siemens PLC

1 x Box
1 x Electric Cable
1 x Interface Cable
Working temperature: -20 ~ + 75
Cable length: 2.5 m
NEW
Full-signal photoelectric isolation, strong stability, can monitor S7-300 online, data transmission block, generally used in the field, because there are usually inverters, modules and other equipment on the field, interference will occur during start and stop, which will affect data Transmission, the isolation type must be selected at this time.
Model: 0CB20
Colour: Black
Input:5.4V
Output current:1.5A
PLC side: 9-pin male
Main parameter: Feature: Isolation advantages: