Meet Your Seller
GLOTRENDS 200mm PCIe 4.0 x16 GPU Riser Cable, 90 Degree Right Angle | Compatible with RTX 4090 4080 4070, RX 7900, Gen 3 and Gen 4, EMI Shielded, Silver-Plated Copper
- 200MM FOR STANDARD MID-TOWERS Long reach for vertical GPU mounts in standard mid-tower and ATX cases, with extra slack for routing behind the motherboard tray from a CPU-direct PCIe 4.0 x16 slot enough margin for thicker coolers and radiator setups.
- FULL PCIE 4.0 x16 BANDWIDTH Delivers up to 32GB/s in a CPU-direct PCIe 4.0 x16 slot; backward compatible with PCIe 3.0 slots and GPUs at Gen3 speed. No drivers, no BIOS settings, no external power required.
- SHIELDED FOR A STABLE SIGNAL Every differential signal pair is individually foil-wrapped for EMI protection, built on 30AWG silver-plated copper with Teflon insulation, so 4K/8K output and sustained frame rates stay stable over the whole run.
- CHECK YOUR HARDWARE FOR GEN4 SPEED CPU: Intel 11th Gen / Ryzen 5000 or newer; GPU: GeForce RTX 40/30 or Radeon RX 7000/6000; slot: direct CPU-connected PCIe 4.0 x16. Older setups still work, just at PCIe 3.0 speed.
- EASY INSTALL, LIFETIME SUPPORT Slide-on installation with no drivers (hot swapping not supported). Ships in an anti-static bag avoid touching the gold fingers. Backed by GLOTRENDS lifetime tech support and a length-selection guide.
Any questions? Ask CelesteSM will help you find out quickly.
GLOTRENDS 200mm PCIe 4.0 x16 Riser Cable (90 Degree Right Angle) Move Your GPU Without Losing Speed A modern graphics card no longer fits neatly beside a motherboard. It blocks airflow, hides the build, sags under its own weight, and simply will not fit in many small cases. A riser cable solves the layout problem but a poor cable also costs you frames. This GLOTRENDS cable moves your GPU without moving the performance needle. At 200mm, this cable gives standard mid-tower and ATX builds the reach they need for a vertical GPU mount, with extra slack to route behind the motherboard tray and around thick air coolers or radiators. The 90-degree right-angle female connector hugs the card so the cable exits flush along the shroud instead of jutting into the side panel. Signal integrity is the whole job of a riser cable. Each differential pair inside the flat cable is individually wrapped in aluminum foil for EMI shielding, and the conductor is 30AWG silver-plated copper insulated with Teflon and finished with a PVC jacket. The result is a clean PCIe 4.0 x16 link up to 32GB/s that stays stable through long gaming sessions and full-load renders, and runs at Gen3 speed when connected to PCIe 3.0 slots or GPUs. To run at full PCIe 4.0 speed, pair the cable with a CPU-direct PCIe 4.0 x16 slot and matching hardware: Intel 11th Gen or Ryzen 5000 series and newer CPUs, GeForce RTX 40/30 or Radeon RX 7000/6000 GPUs, with 32GB dual-channel RAM recommended for the most demanding titles. Installation is a simple slide-on with no drivers or BIOS changes; please do not hot-swap the cable, and keep the gold fingers clean it ships in an anti-static bag.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by YOUCAILI Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















