1pc CT-29B USB Programming Cable PL2303 USB to Mini Din 6 Pin for FT-7800/E/R FT-7900/E/R FT-8000 FT-8100 FT-8500 FT-8800

Cables
Material: PVC outer jacket
Cable: 26AWG*3C, OD4.0 Bare Copper
Cable length: 1.8M optional
Connector A: USB 2.0 type A male
Connector B: 6 pin mini Din
Chipset: PL2303
Compatible radios
FT-7100M
FT-7800/E/R
FT-7900/E/R
FT-8000/R
FT-8100/R
FT-8500
FT-8800R
FT-8900/E/R
PL2303GS USB to Serial Bridge Controller
The PL2303GS is a low cost and high performance USB-to-Serial Bridge Controller. The PL2303GS provides a convenient small-factor solution for connecting an RS232-like full-duplex asynchronous serial device to any USB host. Prolific provides highly compatible drivers that could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.
By taking advantage of USB bulk transfer mode and large data buffers, PL2303GS is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. The flexible baud rate generator of PL2303GS also could be programmed to generate any rate between 1 bps to 12 Mbps.
Features
Full Compliant with USB Specification v2.0 (Full-Speed)
On-chip USB 1.1 transceiver and 5V to 3.3V regulator
On-chip 96MHz Clock Generator
Supports OTPROM (One-Time Programmable ROM) for USB device descriptors. OTPROM can be programmed directly through USB port.
Each IC has unique ID(for Serial Number)
Full-duplex transmitter and receiver
5, 6, 7,or 8data bits
Odd, Even, Mark, Space, or None parity mode
1, 1.5,or 2 stop bits
Parity error, frame error, and serial break detection
Programmable baud rate from 1bps to 12Mbps
Independent power for serial interface
Works with existing PC COM Port software applications
1024-byte bi-directional data buffers (768-byte receive/256-byte transmit)
Royalty-Free Driver Support
==========
Hign-concerned Chemical : None
Model Number