Motherboard USB Splitter, USB2.0 9-Pin USB Splitter 1-in-2, USB Motherboard Adapter 9Pin Line Expansion Cable USB Splitter for Computer Motherboards, NZXT, USB Header Splitter Length 17.6 cm.

Product Description
Convert USB 2.0 9PIN to two 9PIN cables

Converts USB 2.0 9PIN connector on motherboard directly to two 9PIN connectors



Converts USB 2.0 ( 2.54 pitch) 9PIN socket to 2 9PIN plugs (gold plated)

USB 2.0 with 2 sets of USB 2.0 signals, one port per side

This line is used to connect 2 sets of unilateral to 1 set of lines with 2 male 9PIN connectors, so that the 9PIN through the motherboard's native USB signal output instead of the chip transmission, high speed and compatibility, the transmission of the two 9PIN lines can be used at the same time



Usb splitter for NZXT water coolers, LED lights, graphics card displays, air coolers, and other USB control board connectors.



Product Features

1. Plugs into motherboard connector with special design reinforcement

2. One piece molding, more suitable for N times repeated plugging and unplugging

3. Specially designed products for longer service life

4. Strictly in accordance with the USB standard definition of the wiring hole design can prevent incorrect insertion

Attention:

1. Only one port can be used if the 9PIN is unscrewed. This cable is suitable for water coolers, LED lights, graphics card displays, fans, etc., as these devices use only one set of 9PIN signals and do not use 9PIN dual-port signals at the same time.

2. It is not recommended to plug in the 2 USB 9PINs on the chassis panel as the USB port of the chassis needs the signals from both USB ports and uses all of the signals at the same time.