USB to CAN Adapter Model A STM32 Chip Solution, CAN Baud Rate 5kbps~1Mbps is Configurable, Support Windows XP/7/8/10/11 and Linux Systems, Multiple Working Modes

Features Supports CAN 2.0A (standard frame) and CAN 2.0B (extended frame) CAN baud rate is configurable in the range of 5Kbps-1Mbps
Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode. 1. Normal mode CAN normal communication mode for sending and receivig data to and from CAN bus normally. 2. Loopback mode The data can be sent to the CAN bus and feedback to the internal receiver at the same time, cannot receive data, which is used for self-testing. 3. Silent mode Can receive data normally, bnut only can send implicit bit instead of real reports, which is used for analyzing CAN bus activity 4. Silent loopback mode This mode is used for ''Warm self-testing'' (Online self-testing). It can be used for self-testing like Loopback mode, but doesn't affect the CAN bus network. Supports multiple
CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending Supports multiple
CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data Data can be saved as TXT or Excel Supports CAN bus detection for status checking Sending/receiving CAN data with time scale, allows sequentially displaying Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default) Supports setting working parameters by configuration software or serial command, can be saved after power off Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit Comes with master computer software for Windows system, easy to use Easy secondary development, just need to modify the sending and receiving commands
How-to-use Document/User Manual: //bit. ly/3AlKS8g Package Content USB-CAN-A x1 USB Cable ~ 1.5 m x1 Screwdriver x1