Thermaltake Pacific SF Male to Male 30mm Extender White/DIY LCS/Fittings CL-W391-CU00WT-A

The Thermaltake Pacific SF is a white, 30mm male-to-male copper extender with G 1/4 screw threads for custom liquid-cooling loops, suited to PC builders who need to extend or adjust a fitting connection while matching a white build.

Recommended For

• Custom-loop builders bridging two G1/4 female ports that need a straight 30 mm male-to-male extension, such as when connecting loop fittings around nearby components.
• Builders who want to adjust a fitting’s orientation during installation or disassembly; Thermaltake describes this extender’s rotator as adjustable through 360 degrees.
• Custom-loop owners adding a radiator drain arrangement who need an extender beneath a 90-degree fitting for easier coolant access.
• Builders coordinating a white-themed custom liquid-cooling loop who want the exposed extender to match the build’s color scheme.

Real-World Use Scenarios

• When adding a 90-degree fitting beneath a radiator for a drain point, use the extender to move the connection into easier reach; Thermaltake specifically describes this setup as making coolant changes easier.
• When two female G1/4 ports in a custom loop need a short bridge, use the male-to-male extender to connect them while adding 30 mm of reach between components.
• When a loop fitting is difficult to position during installation, use the extender’s rotatable joints to adjust its orientation; this can make it easier to line up the next connection without relying on the whole assembly’s final angle.
• When radiator, reservoir, or distribution-plate ports do not line up for a direct connection, add an extender to bridge the gap; measure the clearance first so the added length does not put strain on the connected parts.
• In a white-themed custom loop, use the white extender where a fitting is visible; it adds connection reach while keeping the fitting closer in color to the surrounding build.