Thermaltake Pacific SF Female to Male 30mm Extender White/DIY LCS/Fittings CL-W393-CU00WT-A

The Thermaltake Pacific SF CL-W393-CU00WT-A is a white, 30 mm female-to-male G1/4 fitting extender for DIY liquid-cooling loops, suited to PC builders who need to extend or adjust a compatible fitting connection.

Recommended For

• Custom-loop builders who need to add 30 mm between G1/4 ports while connecting a female port to a male port.
• PC water-cooling builders routing tubing around nearby components who need extra clearance or length in a tight area.
• Builders who want to adjust fitting orientation during installation or disassembly using the extender’s 360-degree rotatable design.
• Custom-loop builders coordinating a white fitting with a white-themed cooling system or PC interior.

Real-World Use Scenarios

• When a custom-loop port sits close to a radiator, fan, or other component, add the extender to move the connection point outward; the extra space may make the tubing connection easier to reach. Check case clearance before installing it.
• When a tube run falls just short of a loop component, use the extender to bring the G1/4 connection 30 mm farther out; this can help complete the route without remaking the whole run, if the added length fits the case.
• When routing tubing around an obstruction requires both extra reach and a change of direction, pair the extender with a compatible rotary elbow; the extender adds spacing, while the elbow provides the turn.
• During loop assembly, use the rotatable connection to adjust the fitting's orientation for a more convenient tube alignment; this can simplify installation or later disassembly without making the extender itself a 90-degree elbow.
• If a fill or drain valve is difficult to reach behind other loop hardware, use the extender to move a compatible valve fitting outward; the additional reach may improve access, provided the case has room for it.