SIIG HDMI Over IP Encoder & Decoder Transceiver - TX/RX Mode Switching, Cascading, 1080p, One to One 600ft, One to Many, Many to Many via VLAN, 2X RJ45, TAA Compliant (CE-H27P11-S1)

• Long Range HDMI Transmission: Seamlessly integrate extender splitter and switcher functionalities with this versatile device. Transmit HDMI audio/video signals up to 600ft over Cat5e/6 network cables.
• EDID and Resolution Support: Enjoy stunning visual clarity with support for up to 1080p@60Hz and HDCP 1.4 compliance. Automatic EDID pass-through ensures optimal resolution configuration for local and remote displays.
• Highly Scalable Matrix: Function as a scalable Encoder/Decoder (TX/RX) matrix over an IP network extending HDMI signals to multiple displays. Offers 1 to 1 (600ft) 1 to Many Many to Many via VLAN and Cascading modes for flexible configurations.
• IR Extension Capability: Control the HDMI source device remotely via the receiver and enjoy playback at the distant display. IR signals in the 20-60KHz carrier frequency range are supported with included emitter and receiver cables for easy setup.
• Multiple Connectivity Ports: Featuring HDMI video input and output ports dual RJ45 network ports IR emitter/receiver ports stereo audio ports mode selection switch USB port for firmware updates reset button and DC power jack (5V/2A).

• Model: CE-H27P11-S1
• TAA Compliant
• UPC: 662774046235
• EAN: 0662774046235
• Condition: New

Connect the HDMI source device to the video input port and the remote display to the HDMI output port. Utilize the RJ45 network ports for network connectivity. Ensure proper selection of the Encoder (TX) or Decoder (RX) mode based on your configuration needs.

A: The device supports a maximum HDMI signal length of 600ft in 1 to 1 mode while it is reduced to 328ft for other modes. For Cascading TX to TX a maximum HDMI cable length of 33ft is recommended.

A: The IR extension feature allows remote control of the HDMI source device via the receiver enabling playback at the distant display. The device supports IR signals in the 20-60KHz carrier frequency range with included emitter and receiver cables for easy setup.

A: Yes the device includes a USB port for firmware updates ensuring that you can benefit from the latest features and improvements.