Patch Panel 24 Port Cat6A with Inline Keystone 10G Support, Rapink Coupler Patch Panel STP Shielded 19-Inch with Removable Back Bar, 1U Network Patch Panel for Cat7, Cat6, Cat6A, Cat5E, Cat5 Cabling

• Toolless terminationThis home networking panel does not require puch down tools. Pass through 24 port patch panel came with couplers making it easier to connect the cables. This Cat6a/ Cat6 patch panel has more expansion and upgrade capabilities than 12 port patch panel and 16 port patch panel and also can use two of 24 port patch panel cat6/ Cat6a instead of 48 port patch panel.
• Easy use and Time saveUp to 70% time save and only 10 minutes needed to install Cat6a shielded inline 1u patch panel. This ethernet patch panel is much better than punching down keystones patch panel 24 port and 110 punch blocks.
• Easy expansion and repaireIts patch panel holder allows easy input and output cat6a coupler. Therfore convenient to repaire when 1 port network broken. Meanwhile if need expand in the future you can easliy replace cat6a coupler with other coupler such as fiber adaptor coax coupler HDMI VGA and so on.
• 10G speed via Gold plated pins All 8P8C of rj45 jack panel keystone are golden plated to support better network connection up to 10G speed Ethernet network. This is a well made keystone panel and can be used as cat7 patch panel to upgrade cat7 network.
• Detachable back bar includedThis patch panel wall mount contains thick steel detachable back bar. With zip ties it can effectively reduce the deformation of the ethernet cable improve the working stability of the network connection port and avoid keystone loose and the occurrence of network failures caused by the loosening and deformation of the cable. What you get?24 pcs sturdy cat6a coupler keystone loaded patch panel wall mount removable cable back bar screws tie wraps.

The Rapink ethernet patch panel support excellent performance transmission up to10-Gigabit compatiable with the TIA/EIA 568-C.2 standard and cat7 cat6a cat6 cat5e cat5e UTP and STP cabling system.

Standard 19-inch 1u patch panel suitable for Rackmount Wallmount or cabinets.

This patch cat 6 wall mount contains thick steel detachable back bar. With zip ties the back bar helps with cable management and takes some stress off the coupler improve the working stability of the network connection port and avoid keystone loose and the occurrence of network failures.

Use this to replace a punch down patch panel.

Plug and play on both sides for ethernet cables.

This 19 rack blank panel is less prone to failure as well.

CAT6A passthrough coupler tested full 10 gigabyte certified.

Inline modular patch panel much better than punching down Keystones

These cat6 shielded patch panel were easy to install and use. Pass through design is more friendly to non-professional person since it is use terminated cables and plugged directly into switches.

Coupler patch panel let you dont have to spend time wiring Cat5/6 in order to get your system up and running.

This network patch panel cat 6 will make your rack look much cleaner.