AOMOPROING HDMI KVM USB Extender Transmit 1080p HD Video Over Cat5e/6 Ethernet Cable 50m (164ft) for Mouse and Keyboard Control Remote Signals

Remind:

(1) Directly connect your signal source and monitor before connecting HDMI Extender, and check the signal status.

(2) The red light represents the power, and the green light represents the signal. It is recommended to use 2 Ethernet cables for testing if there is no signal.

(3) RJ45 requires the conventional T568B standard. Need to change the wiring sequence if you are using T568A.

-

How to set EDID:

If HDMI Extender can't recognize your TV's EDID during the first connection, please set the following settings.

a) Connect the TV to the HDMI IN on Transmitter(TX).

b) Connect the power and start the TV and Transmitter.

c) Hold EDID button for 3-5 seconds. Green light stops flashing, indicating EDID copy is complete.

-

Packing list:

1x Transmitter

1x Receiver

1x USB-B to USB-A Cable

1x Power adapter

1x User manual

TRANSMIT AUDIO/VIDEO LOSSLESSLY: Send HDMI signal to remote monitor as smooth as direct connection. Support 1080P@60Hz FHD, compliant with HDMI 1.3.

HDMI OVER ETHERNET: Transmit up to 50m/164ft by Cat6/7 cable, 40m/130ft by Cat5e cable. For better audio&video quality and longer transmission distance, we recommend Cat6 or Cat7.

USB&KVM: Easily control the signal source with keyboard and mouse, very suitable for computers, systems, etc.

SIMPLER SETUP - Just connect a power adapter to the transmitter and it will start the device.

Compatible With Most Operating Systems - Windows 2000/XP/Vista/7/8/ 8.1 /10, Mac OS 9.1 & Higher, Linux 2.4 or Above.