8K@60Hz 4 Port USB 3.0 Triple Monitor 1 HDMI + 2 DisplayPort KVM Switch for 4 Computers Sharing 3 Monitors and 3 USB 3.0 Ports, Audio & Microphone Output
- 4 computers / laptops share one set of keyboard, mouse and 3 monitors (HDMI+2 DisplayPort)
- Triple monitors output support up to 8K@60Hz for extended and mirrored display
- Two Switching modes: Button switch and wired remote.
- With extra 3 USB 3.0 and Audio Microphone output
- Cross support most major OS including Windows, Linux, Mac and more
- The ports that need to plug in HDMI/DisplayPort/USB cables are all hidden behind the KVM, so the desktop doesn't get cluttered
installation steps:
1. Insert the DC/12V adapter into the KVM ;
2. Plug the 1*HDMI cable and 2*DisplayPort cable into the KVM switch and monitor;(Output)
3. Plug the 2*DisplayPort cable, 1*HDMI cable, and 1*USB cable into the KVM switch and your computer/laptop (HDMI and DP cables are not included)(Input)
HDMI IN 1A + DP IN 1B + DP IN 1C + USB IN 1=PC1
HDMI IN 2A + DP IN 2B + DP IN 2C + USB IN 2=PC2
HDMI IN 3A + DP IN 3B + DP IN 3C + USB IN 3=PC3
HDMI IN 4A + DP IN 4B + DP IN 4C + USB IN 4=PC4
Please check whether HDMI IN 1A, DP IN 1B, DP IN 1C, and USB IN 1 corresponding, and whether HDMI IN 2A, DP IN 2B, DP IN 2C and USB IN 2 are corresponding. Mixed insertion is not supported. The same goes for PC3 and PC4.
4. Insert the mouse and keyboard into the KVM switch
5. If needed, you can connect a microphone and audio port
1. Most of the reasons why only one video output works is because of an incorrect connection. Please make sure each PC has(1 HDMI +2 DP+USB cable) connect to the KVM.
2. If the input USB3.0 ports are not connected or connected incorrectly, the output USB device will not be recognized.
3. Note: HDMI and DP cables are not included
- 3 monitors 4 computers KVM comes with a 3.5mm Audio Jack port with a DAC chip inside, which can be inserted into a 3-segment 3.5mm earpiece device, and a 3.5mm microphone interface, which can be inserted into a 3-segment microphone.
Switch by Panel button
- Push-button design allows for one-touch switching using a button on the KVM Switch box, eliminating the need to plug and unplug cables frequently, saving space and time.
Wired Remote Control
- Supports wired remote switching for easy cable management, you can switch directly on the desktop, convenient for your life and work.
- 1x 4 Port USB 3.0 Triple Monitor KVM Switch,
- 4x USB 3.0 Cables,
- 1x Power Adapter,
- 1x Wired Button Switch,
- 1x User's manual.

















