here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
- Flexible Switching Options ---- Synvisus DP KVM switch 2x1 can switch between 2 connected DisplayPort computers in 1-3 seconds via 2 methods: front panel pushbutton and wired remote button. Note: laptops or PCs without DP ports may need a DP converter, the switching time between 2 PCs will be 3-5 seconds when using the converter
- Additional USB 2.0 Peripheral ---- 4 Plug-and-Play USB 2.0 ports allow you to share additional 4 USB peripherals including a USB hub, printer, scanner, webcam and other USB 2.0 drives between the 2 connected computers.
- Wide Compatibility & Back by 1-year Warranty ---- Compliant with laptops or PCs with DP ports and other USB 2.0 devices such as USB hub, printer, scanner, webcam etc. Works with Windows, macOS, Linux, Unix, Netware, etc. Synvisus 2 Port DP KVM Switch can be widely used in education, meeting training, video surveillance & security and protection System, etc
Overview
Synvisus 2 port DisplayPort KVM Switch 4K@60hz has a compact and elegant design for easy operation. It enables effortless control over 2 devices with video connections or computers using a single keyboard, mouse and monitor, saving space on your desk and reducing equipment clutter.
This advanced Synvisus 2 port DP KVM switch is DP 1.2 compliant and supports up to 4K@60Hz resolution. Synvisus DP KVM switch 2 port can read and remember the monitor's parameters, decreasing delays or changes in video resolution when switching between computers.
Features four USB 2.0 ports, it is perfect for connecting USB 2.0 peripherals such as a printer, scanner, USB Hub, U Disk, Webcam or any of your USB 2.0 devices to Synvisus DP KVM Switch 2 port.
Note:
- We suggest the length of the DP cables(not included in the package)are not over 1.5 m/4.92 ft and recommend to use standard DP 1.2 /1.4 cable.
- Powered by 5V/1A adapter (not included in the package).
- Feel free to reach out to us via Amazon Message if you have any questions during use.
For the Daisy Chained Displays,please note:
- The independent Graphics card (GPU) supports DisplayPort (1.2 or better) and the MST. (DP has up to 8 video channels);
- DisplayPort 1.2 MST-capable monitor with MST mode enabled
- A DP-to-DP cable for each monitor in the chain. Cables between monitors should be 3ft or less to avoid cable clutter.
You could use the direct connection method first for testing: connect the DP independent graphics card and the DP interface of the monitor for testing.
Thoughtful Design
- The housing can offer good heat dissipation.
- Features anti-slip matte design, it gives you the elegant look
Two Switching Modes
- Wired Remote Port Selector
- Front Panel Push Button
Smart Chip, Fast Switching
The switching time will be in 1-3 seconds with smart chip,please note:
- Recommend to use DP 1.2 /1.4 cable
- The length of DP cable(not included in the package) not beyond 1.5 m/4.92 ft
- Powered by 5V/1A adapter (not included in the package)
Features
- Compliant with DisplayPort 1.2 standard
- Resolution: up to 3840x2160@60Hz (Backward Compatible)
- Power: DC 5V/1A power adapter(not included in the package)
- Works with Windows, macOS, Linux, Unix, Netware, etc.
- Support wired remote port selector switching and front panel push-button switching
- Built-in ESD static protection circuit to protect the system in all aspects
- Support additional 4 USB peripherals including a keyboard, mouse, USB hub, printer, scanner, webcam and other USB 2.0 drives
- LED indicator showing the working status
- Easy to install, plug and play
If the wired remote selector cannot switch between two PCs:
- First, please make sure the selector has totally inserted into the "con" port of the switch
- Second, exchange the two male heads of the wired remote cable.
- Third, tighten both ends of the male head, then plug again and try(it may be loose during transportation)