(UK Plug)(1 TX and 1 RX)150M HDMI KVM Extender over IP Rj45 Cat5e/6 HDMI KVM Matrix Extender Switch Support Many to Many, One to Many via Network Switch

Description:
The H. 264 HDMI-Compatible extender adopts standard Ethernet TCP/IP protocol, transmit HD video and audio over single cat6 cable, and support One-to-many applications with POE switches. The equipment has excellent image processing and transmission capacity, makes signal transmission more smooth and steady, is a kind of economic and efficient way of HDMI-compatible signal extension
About this item:
HDMI Matrix Over POE Switch:
Match multiple signal sources and multiple monitors, support up to 99 groups of devices and easily distribute audio video signals.
Support one signal source to match multiple monitors, and multiple signal sources to match multiple monitors.
HDMI Extender Over Cat5e/6 150m:
Connect TX and RX with one Ethernet cable up to 150M, suitable for single-channel long-distance signal transmission.
KVM and USB:
Easily remote control the signal source with keyboard and mouse, very suitable for computer, NVR, systems, etc.
IR Function:
Support infrared to receive remote control commands, and comes with IR cable kit.
Features:
Transmits HDMI-Compatible video and audio signals up to 150m over a single CAT6 cable;
Support video resolution up to 1920*1080P@60Hz;
Supports over TCP/IP protocol, One-to-many, many-to-many applications with POE switches;
Supports Stereo Audio over IP, independent to HDMI extension Support over TCP/IP;
Supports USB (Keyboard, Mouse) extension over IP;
Compliance with HDMI-compatible 1.3 and Compatible-HDCP 1.2 standard;
High compatibility, can auto-match source and display device;
Built-in automatic adjustment system, make the image smooth, clear and stable;
Simple to install, plug and play.

Specifications

:
Standards: Compatible-HDMI 1.3 /HDCP 1.2
Compressed format: H. 264
Maximum pixel clock: 165MHz
Maximum data rate: 6.75G bps
Resolution: 1920X1080P@60Hz
Connector: Compatible-HDMI
Impedance: 100
Interface: 3.5 mm earphone seat
Signal direction: Unidirectional
Signal type: Digital
IR frequency: 20-60kHz
Interface: RJ45
Transmission distance: CAT6---150m/CAT5E---120m
Power supply: DC 12V
POE input voltage range: 36-57V
Power dissipation: MAX 3.3W
How to set:
Red light: Indicates power
Green light: Indicates signal
Many-to-many setup: CANNOT set the same ID number on the TX. RXs searches for TX signal automatically, such as 02 matches
02. Set the ID number by "TAN" and "ONE" buttons, then press "OK".
One-to-many setup: Multiple RXs match one TX, such as four "03" matches one "03".
Remind:
1)Directly connect your signal source and monitor before connecting HDMI Extender Matrix, and check the signal status.
2)If the ethernet cable within 10 feet has no signal while testing, try a longer cable.
3)No adapter is required when connecting to a POE Switch.
4)Two adapters need to be connected to TX and RX for the devices to work properly if NOT over POE Switch.
Packing list: (for 1TX+1RX )
1x HDMI Transmitter
1x Receiver
1x USB-A to USB-MINI Cable
2x Power Adapter
1x Manual
1x IR Cable (set)
Notice:
Here are 3 options "1 TX and 1 RX" "only 1 TX" "only 1 RX"
If you buy "1 TX and 1 RX" you get a whole pair and accessories.
If you only buy "only 1 TX", you get 1 TX, not including RX.
If you only buy "only 1 RX", you get 1 RX, not including TX.
We'll send you the options for your purchase.