USB 3.0 HDMI KVM Switch for 2 PC 1 Monitor, 2 Port HDMI KVM Switch 8K @60Hz 4K@120Hz, Support Simulation EDID HDCP 2.3 HDMI2.1, Share USB devices like keyboard and mouse via 4 USB3.0 ports

USB 3.0 HDMI 2.1 KVM Switch 2 PC 1 Monitor 8K@60Hz / 4K@120Hz and 4 USB 3.0 devices

This 2-port HDMI 2.1 KVM switch allows you to control two computers or laptops with one set of wired or wireless keyboard and mouse and one monitor.
Switching can be done at any time using the wired remote control and panel buttons.
Video formats supported by this HDMI 2.1 KVM switch include 8K@60Hz, 4K@144Hz/120Hz, 2K, 1080P, 1080i, 720P, RGB
4:4: 4, 8bit.
Full compatibility with major operating systems including Windows, Unix, Mac OS and Linux
With 4 USB 3.0 ports, supports USB port devices (e. g. mouse, keyboard, USB flash drive, webcam, etc. ) Compatible with wired or wireless keyboards and mice.
Precautions:



please make sure the connected computer, monitor and HDMI cable used all support 8K so you can get 4K@100Hz resolution or higher. If the setup distance allows, the HDMI cable should not be longer than 1.5 m, as too long a cable will cause signal loss, leading to instability and other problems. A
Make sure that the USB input is connected, otherwise the mouse and keyboard will not be recognised.
Additional power is not required as the USB port not only transmits data but also powers the KVM. However, if a high-powered USB device is used, this may cause unstable detection as high-powered USB devices consume too much power.
Ultra HD 8K@60Hz visual delight


The HDMI 2.1 KVM switch uses the latest HDMI 2.1 technology and is compatible with HDMI 2.0 and HDMI 1.4, supporting 7680 x 4320 @ 30/60 Hz, 5120 x 2880/1440 @ 50/60 Hz, 3840 x 2160 @ 120 Hz, 3440 x 1440 @ 144 Hz, 3840 x 1080 @ 240 Hz, 2560 x 1440 @ 144Hz and other resolutions.
HDMI 8K KVM Switch with 4 USB 3.0 ports

There are four USB 3.0 ports with transfer rates of up to 5 Gbit/s for sharing devices such as keyboards, mice, scanners, flash drives and more.


Notice:

The product does not come with DC power and does not support high performance devices on our switches.
Easy to operate and quick to switch.

Simply press the button on the front of the KVM panel or the wired desktop controller (included) to switch to another computer in about 2-4 seconds.


Important Notice:

Please use a qualified HD-MI 2.1 cable to achieve the specified 8K@60Hz or 4K@120Hz effect, otherwise flickering or black screen will occur.
We strongly recommend a qualified HDMI 2.1 cable with a length of less than 3m.
We recommend a standard wired USB keyboard with 104 keys. A mechanical keyboard and mouse are not recommended as they consume a lot of power and affect stability.
Please ensure that the two USB cables supplied are connected to the computer. These two USB cable connections are used to power the USB device.
ackage contents:
1 x HDMI KVM Switch,
2 x USB Cables,
1 x Wired Remote,
1 x User Manual