Ennovor Yeemie Pro USB 3.0 HDMI Dual Monitors 4 Computers KVM Switch, Supports EDID, 4K@60Hz HDMI Dual Monitor Switch for 4 PCs with 3 USB3.0 and Audio Microphone Ports, 4 Port HDMI KVM Switch for 4PC

USB 3.0 Dual Monitor 4 Port HDMI + HDMI KVM Switch 4K@60Hz for 4 Computers
With this 4 port USB 3.0 dual-monitor HDMI KVM Switch (HDMI+HDMI), you can easily control 4 signal sources at the same time, share the same keyboard and mouse, and share 2 monitors.Note: Each input source device must be connected to two dual monitors.
Product Features
4 computers share one set of keyboard, mouse, 2 monitors, and more USB 3.0 peripherals.This dual monitor HDMI KVM switch Supports maximum resolution up to 4K 60Hz YUV 4:4:4, HDCP 1.4, HDR 2.2, with EDID Emulator; Dual monitors output support up to 4K@60Hz for extended, mirrored or spliced displayDepends on your computer's graphics card.;Compatible with Windows 11/10/7/2000/XP/Vista, Linux, UNIX, Ubuntu, Fedora, and other systems;2 Switching modes: Button switch and wired remote.The ports that need to plug in HDMI/USB cables are all hidden behind the KVM, so the desktop doesn't get cluttered;No complicated installation is required, and non-professionals can easily operate it.Independent Audio Microphone output.
Installation steps:
1. Insert the DC/5V adapter into the KVM ;
2. Plug the HDMI cable into the KVM and monitor;(Output)
3. Plug the HDMI cable and USB cable into the KVM and your computer/laptop (HDMI cables are not included)(Input)
HDMI IN1 A + HDMI IN1 B + USB IN1=PC1HDMI IN2 A + HDMI IN2 B + USB IN2=PC2HDMI IN3 A + HDMI IN3 B + USB IN2=PC3HDMI IN4 A + HDMI IN4 B + USB IN2=PC4
4. Insert the mouse and keyboard into the KVM switch
5. If needed, you can connect a microphone and audio port
Note
Most of the reasons why only one video output works is because of an incorrect connection. Please make sure each computer has 2 HDMI cables connected to the KVM.If the KVM switch does not work, you can turn off the switch on the panel and turn it on again after 2-3 seconds, and it will return to normal.Please check whether HDMI IN1 A,HDMI IN1 B and USB IN 1 correspond, and whether HDMI IN2 A,HDMI IN2 B and USB IN 2 are corresponding. Mixed insertion is not supported. The same goes for PC3 and PC4.Note: HDMI cables are not included
USB 3.0 Dual Monitor KVM Support 4K@60HZ
Supports high resolution up to 3840*2160@60Hz and downwards.Note: Only when both your computer Graphics card, monitor and cable all support 4K@60Hz, then you can get the 4K@60Hz effect, so if you want the maximum resolution you have to check your devices first.
With Simulation EDID
This KVM dual monitor switch can simulate the EDID of the display, and store the resolution and refresh rate of the display, it comes with EDID emulators in each input port, keeping PCs always having correct display information.Without EDID, your windows may move around when switching.No longer have to sit and wait for the windows to adjust.Another feature of EDID is the ability to automatically identify the best resolution.
3 Port USB 3.0 interface with 5Gbps
Plug and Play
Supports 5Gbps data transfer speed , can transfer files in Seconds, Much faster than USB 2.0.3 USB 3.0 ports, backward compatible with USB 2.0 and USB 1.1, share USB devices such as keyboard mouse scanner, printer, flash drive, etc.
Supports Separate Audio and Microphone Output
This HDMI dual monitor KVM switch comes with a 3.5mm Audio Jack port with a DAC chip inside, which can be inserted into a 3-segment 3.5mm earpiece device, and a 3.5mm microphone interface, which can be inserted into a 3-segment microphone.
LED Indicator
When switching to which PC, the LED will tell you whether PC1 or PC2 or PC3 or PC4 is active.
Wired Remote Control
Supports wired remote switching for easy cable management, with digital 1/2/3/4 indicator light.
Switch by Panel button
Push-button design allows for one-touch switching using a button on the KVM Switch box, eliminating the need to plug and unplug cables frequently, saving space and time.