This small-sized USB cam can be used as a lightburn cam, which can be used to capture images of the workpiece and display them in the lightburn software. Ideal for working with irregularly shaped workpieces or for engraving on objects that do not have a flat surface.
Camera:
Sensor: 1/ 2.8
IMX415+Resolution: 4k 3840 x 2160+Data
Format: H. 265/H. 264/MJPEG/YUY2+Frame
Rate: H. 265/H. 264/MJPEG 30fps@3840x2160.
Lens:
Field of View (FOV): H=24~110° +Focusing
Range: 0.33 ft (10CM) to infinity+Connecting
Port Type: USB 2.0 Interface &HDMI V 1.4 Interface
Adjustable parameter: Brightness, Contrast, Saturation, Hue, Sharpness, Gamma, Gain, White balance, Exposure.
Power Supply: USB Type-C, Type-C & HDMI Display Simultaneous
Operating Temp: 14°F~158°F (-10°C~+70°C), Cable
Length: (1PCS 1.2 m cable with Type-C port, 1PCS 1.5 m cable with HDMI port)
2.8 -12mm 4X optical zoom+2X Digital Zoom, Every
Details
can be Seen Clearly!
Can Drive:
3840x2160 MJPEG 30fps/ H. 264 30fps/ H. 265 30fps
2560x1440 MJPEG 30fps/ H. 264 30fps/ H. 265 30fps
1920x1080 MJPEG 30fps/ H. 264 30fps/ H. 265 30fps/ YUY25fps
2.8 -12mm variable focus lens, good zoom in&out, ideal for long distance shooting!
Widely Application:
Monitoring 3D printer, telephoto webcam, close up or monitoring camera for an industrial application
for research, technical or hobby projects, Raspberry Pi project to record bird feeding, keep the recording in loop, especially getting a satisfactory long distance focus outdoors
Plug and play, free driver, UVC compliant, just plug in and go.