PoE Splitter 5V 4A for Raspberry Pi 4 and Jetson Nano, Active PoE+ to Barrel Jack or USB-C Adapter, IEEE 802.3at/af Compliant

What is it - A PoE to USB C splitter to split the PoE+ signal ( 802.3 at) into gigabit Ethernet and 5V/4A DC power, which could be adapted to USB-C or 5521 barrel port.; What is PoE Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source.; Why PoE splitter A cost-effective way to add plug-and-play PoE support to a 5V power-hungry device, such as the Jetson Nano with a barrel port or the Raspberry Pi 4 with a USB-C port.

; What else needed - You need an IEEE 802.3 at compliant PoE+ switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE+ signal to feed the splitter.; Note 1) This splitter does not support other voltages than 5V or QC/PD protocols. 2)This splitter needs PoE+ ( 802.3 at) devices to unleash its full power. 3) Just put the split Ethernet aside if you dont need the data. 4)The Split Ethernet cable does not carry power anymore.; Non-Standard PoE Risk This splitter requires IEEE 802.3 af/at PoE.

Non-standard (passive) PoE switches deliver power without negotiation, which can Overvolt and damage connected devices